ooops!!!

[johnny's86nash]

was doing some wire shortening and making things neat when i came across the connection to the rad fan.

The harness was just hanging, back side was broken not allowing it to clip to the rad. "ok" no problem i've got a bunch of new weather packs, this ones getting replaced.

Here's the problem I disconnected the weather pack and started cutting and replacing....

black/red sripe.............
black/purple(pink?) .... 3 wires. I cut the other end of the connector and ended up with 3 black wires black.............................

OK, I need to know which goes where......there are 2 wires on the fan and one on the resistor

Thanks in advance

 

[pacecarta]

try this
http://vortexbuicks-etc.com/fan.htm