PACKAGE DEAL. cleaning out the garage sale. new used, & perf. stuff cheap

TURBOTIMMER

Well-Known Member
Joined
Jan 5, 2002
all parts listed for an 86-87. shipping extra unless specified:
-main accessory bracket. $50
-y shaped alt. bracket. $30
-L bracket behind access. bracket. $10
-low mileage tensioner. $75
-y bracket behind alt. $30
-a/c compressor. worked good when pulled. I deleted my a/c. $50
-tensioner with broken ear. $10
-2 sets of hard vacuum lines. (going under the tb) $30 ea
-3 cam sensors. $40 ea
-1 cam sensor with broken ear. still worked when pulled. $10
-ps pump. $30
-pass side relay bracket with relays. $30
-egr solenoid. no bracket. $20
-heater control valve from my 59k mile car. worked fine, I just wanted new and shiney. $10
-3 wastegate solenoids. discontinued from GM. $40 ea.
-both coilpack brackets. $40 for both
-2 stock turbo elbows. $15 ea.
-stock ic fan. got a little too close to the ic. $20
-billet inlet bell for bigger TA style turbo. $20
-crank sensor and bracket. worked when pulled. $30
-stock balancer. $75
-stock ic brackets. driver's side modded by some idiot. $30 for the pair
-stock fuel lines from frame to fuel rail. 2 feed and 1 return. $30 for all
-stock inlet bell. $5
-hard heater core lines. also have the fitting for the intake. $30
-cut up stock ic with dutt neck. I also have another ic I cut in half to make a stretch, but never got finished. $75 for all
-3 starter heat shields. $5 ea.
-a/c lines. 2 sets. $30 ea.
-a/c condenser. also out of my car. $30
-new casper's ground stretcher kit. $10
-charcoal canister. $10
-Radiator hold down plate. not perfect, but decent. $40
-breather heat shield. Goes behind the turbo. $5
-oil cooler adapter and lines. Lines are kinda cruddy, but they didn't leak. $30
-2 driver's side headers, 1 passenger side. They all need work. $60 for all
-3'' aluminized testpipe. has 3 bolt header flange welded on the motor side. $20
-pair of rear exhaust hangers. They bolt to the frame up near the spring. $20
-2 engine wire harness's's's'. One was on a running car, the other was for parts. $150 for both
-plastic vacuum block. $5
PERFORMANCE STUFF:
-RJC power plate. new with gaskets. $40
-100lb valve springs. tool included. $40
-used torque strap. no eye bolt, just strap. $5
-atr ramair air cleaner housing thingy. No ductwork or air cleaner. $10
INTERIOR:
-new GM burgandy shifter handle. All new chrome rings and buttons. $40
-burgandy steering wheel. Not leather. no parts just wheel itself. Good for a core. $20
-2 gauge bezels. one is from an n/a car. no "3.8turbo" emblem. the other is from a turbo car, but has the wrong color insert around the defrost button. Both are very nice. $50 for both.
-radio bezel. also nice. $15
-grey dash plaque from 86 t type. just says buick regal. decent shape. $20
BODY:
-87 chrome grille. nice driver quality decent chrome. no cracks. "buick" emblem included. new ones are $400-$500. this one is $75
-turbo t hood ornament. good driver quality. $30
-driver's side chrome taillight. driver quality. has small crack in the reverse light lens. not bad, though. $30
HOT AIR:
-std block. 14 bolt. was supposedly rebuilt before I got it. I tore it down to check it out, and it appears that it was. $50. WILL NOT SHIP
-std bore stock turbo pistons on stock rods. $50
-14 bolt baffled oilpan. A little banged up from moving the motor around while it was still together, but still useable. $30
-2 hotair intakes. 1 is basically complete, the other isn't. $30 for both

I think I've priced everything more than fair. Add everything up and it comes out just over $2000. I would rather sell as a package deal, but if I don't get any interest within a couple of days, I'll start splitting it all up. I'll take $1200 for everything as a package deal. Email me at turbotimmer@hotmail.com or post here.
 
pics
 

Attachments

  • DSCF0600.jpg
    DSCF0600.jpg
    65.4 KB · Views: 668
  • DSCF0601.jpg
    DSCF0601.jpg
    52.4 KB · Views: 667
  • DSCF0602.jpg
    DSCF0602.jpg
    66.3 KB · Views: 668
  • DSCF0603.jpg
    DSCF0603.jpg
    59.9 KB · Views: 661
  • DSCF0604.jpg
    DSCF0604.jpg
    59.7 KB · Views: 657
more
 

Attachments

  • DSCF0605.jpg
    DSCF0605.jpg
    38.8 KB · Views: 651
  • DSCF0606.jpg
    DSCF0606.jpg
    67.5 KB · Views: 652
  • DSCF0607.jpg
    DSCF0607.jpg
    58.9 KB · Views: 644
  • DSCF0608.jpg
    DSCF0608.jpg
    82.9 KB · Views: 638
  • DSCF0610.jpg
    DSCF0610.jpg
    58.7 KB · Views: 635
ng
 

Attachments

  • DSCF0611.jpg
    DSCF0611.jpg
    45.3 KB · Views: 632
  • DSCF0612.jpg
    DSCF0612.jpg
    79 KB · Views: 629
  • DSCF0613.jpg
    DSCF0613.jpg
    72.5 KB · Views: 625
  • DSCF0614.jpg
    DSCF0614.jpg
    56 KB · Views: 619
  • DSCF0615.jpg
    DSCF0615.jpg
    70.6 KB · Views: 621
There is also a new GM a/c delete pulley in there. $40
 

Attachments

  • DSCF0616.jpg
    DSCF0616.jpg
    54.8 KB · Views: 619
  • DSCF0617.jpg
    DSCF0617.jpg
    58.8 KB · Views: 613
If you decide to sell separate, I'm interested in the headers. How much for shipping to 21060?

Thanks,
Don
 
Ill take the 2 stock turbo elbows. $15 ea. and the headers for $60 if still available to 06492. Paypal or MO. Let me know.
 
hard heater core lines.

I'm interested in the hard heater core lines if you sell separately.

Let me know including shipping to 75455.

Thanks
 
Ok, looks like I'll be seperating everything. SALE PENDING ON:
2 cam sensors
2 starter shields
ground stretcher kit
charcoal canister
breather heat shield
oil cooler lines and adapter
3'' testpipe
rear exh. hangers
2 engine harness's
vacuum block
power plate
burg shifter handle
gauge bezels
hood ornament

I'll keep trying to update and sort all this stuff out.
 
L bracket behind access. bracket. $10

Ill take it pm sent let me know
 
don86t, aintno8, national newb, bison, you all have pms.

Turbo1, pp is sold pending payment. I'll let you know if deal falls through. Its for stock plenum.

Ramdge, $40 shipped on heater lines.

coldair85gn. you have pm.

Cme2fly, $70 shipped for both.

Guys, I'll accept a postal money order or paypal. Add 3% for paypal fees.
turbotimmer@hotmail.com
 
Top