PCV Valve confusion

[BFlat]

Will be taking some parts off for replacement & figured it will be a good time to replace the PCV valve and grommet since it would be easier to get at. Did searches and found several suggestions at all different costs, all of which got at least a few negative reviews. What PVC valve and grommet should I get for a stock GN that will never (he says now) see over 15 lbs of boost? Thanks

 

[TexasT]

Is this the hole at the front of the pass side valve cover? If so pretty much every one puts a little k&n filter in there and calls it a day.

 

[BRAD_PADGETT]

Stock motor PCV- Replacement American Standard V242. There are other options as well.

 

[TurboTGuy]

Be prepared, that grommet can be a buggger!

 

[BFlat]

Thanks. I’ll have a shop vac going when I remove the old grommet. Parts stores list a Dorman grommet as being correct, but lots of reviews say it doesn’t fit. Ideas? Also is it any easier to put the grommet on the valve first before trying to cram it in the valve cover?

 

[BFlat]

Stock motor PCV- Replacement American Standard V242. There are other options as well.

Is this the hole at the front of the pass side valve cover? If so pretty much every one puts a little k&n filter in there and calls it a day.

 

[BFlat]

Thanks Brad.
TexasT - nope. Think you’ve described the breather that goes on the front of the PS valve cover.

 

[1KWIKSIX]

If you’re looking for the correct PCV gromet that is installed in the intake manifold, then both Highway Stars & Richard Clark offer the proper one. Dennis Kirban used to supply these (which were from Richard Clark). I assume Kirban Performance still offer these, but you’re on your own there now .

Grommet - PCV Valve 1254119

Highway Stars sells the correct PCV valve grommet 1254119 for 1986-1987 Buick Grand National

www.highwaystars.net

https://www.kirbanperformance.com/pcv-valve-grommet-7214/p460

 

[626gn]

Will be taking some parts off for replacement & figured it will be a good time to replace the PCV valve and grommet since it would be easier to get at. Did searches and found several suggestions at all different costs, all of which got at least a few negative reviews. What PVC valve and grommet should I get for a stock GN that will never (he says now) see over 15 lbs of boost? Thanks

I have a never used factory AC Delco CV893C PCV and Kirban grommet. DM if interested.

 

[fLiP650]

I have a never used factory AC Delco CV893C PCV and Kirban grommet. DM if interested.

View attachment 402812

How much I’m intersted can u ship to California ?

 

[626gn]

How much I’m intersted can u ship to California ?

Sorry, already sold and shipped off to Bflat.

 

[Turbo6inKY]

Is this the hole at the front of the pass side valve cover? If so pretty much every one puts a little k&n filter in there and calls it a day.

Until they get a scan tool and can't understand why their BLMs are so high.