please help i need discontinued parts....

[dzan14]

Hello, please help i need discontinued parts....i have a 87 t-type and i need a gasket that goes between the elbow and turbine housing, (the elbow then connects to the down pipe) was thinking about making one...
i also need a single nipple heat sensor that sits on the front right side of the intake. i am almost sure that it is my engine temp sensor.
both of these parts are discontinued and holding me back from final assembally! if some could please help i would really appreciate it. for some reason it will not allow me to upload my pics...

 

[HIboostGN]

Hi, There is no gasket from GM that went between the elbow and the turbo. There was a seal that went from the elbow to the downpipe. Which sensor do you need? The one on the top of the manifold on the drivers side? Or the one facing front on the Pass side? That will help us help you.
Jerry

 

[Bweavy]

not needed but available
GBodyParts.com Online

sensor is here:
GBodyParts.com Online

 

[XXQUICK6XX]

Or try this Premium Gaskets by SCE and look for #4672

or here http://www.summitracing.com/search/?keyword=SCE 4672&dds=1


Steve