You can type here any text you want

Ported heads

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
I have a set of fully ported Steal heads with bigger valves for $1000.00 Set up for roller cam.
 
shipping

My friend have shipping company in florida, he ships my cars and parts for fair pricefrom there...:D
 
Not ported but stage 1jr

I have a pair of UN-PORTED Stage 1 jrs that are leftover from my Bro-in-laws car. He went with stock style rebuilt units instead.

He bought them from G-bodyparts.com, they are NOT ported, but have unmachined heat (exhaust) crossover,
bee-hive valve springs,
and undercut stems on the intake or exhaust valves, I forget which.

We're just looking to get some money back out of them, $400 plus shipping takes them. They would make good candidates for a port job, as the heat crossover is already blocked, and they have the upgrades listed above.

As I understand it, you must remove the EGR and disable the EGR in the ECMs PROM to run with the blocked crossover. That's one reason the bro-in-law went another direction.

These were advertised by gbodyparts.com as "used by a major oil company for testing, under 30 minutes run time".

Honestly, they looked like they tested fuel additives, as they had deposits on the backside of the intake valves, so I cleaned them up, and lapped the valves. They should be ready to run, but like I said, they would be good starting point for a ported set.

Take them or leave them, I thought you might be interested.

Thanks, Bill
 
I have a set of irons that the bowels were ported before I got them. I am in the process of finishing the int ports and will start the exh soon. Make me an offer as I was planning to take them to BG this year in Oct. I am only doing the porting so the guides and seats need to be checked before assembly. Heads will be sold bare. Can provide detailed pics if interested.

Scott
 
You looking for complete ( rockers, springs, valves ) or bare..... ? I have a set I may sell. Either way you want them ......
 
I have a FRESH set of 8445 UNPORTED, new comp 980 valve springs, new seals...FRESH, NEVER RUN, Fully assembled, new 3 angle valve job. Perfect candidate for a port job.

Bolt on and go, or port them, and reassemble.

$200 shipped.
 
Back
Top