Powermaster to Hydroboost Conversion

[Bob Lob-Law]

I have decided to remove my Powermaster and replace it with a Hydroboost system for my 87 setup. I have heard of the Hydroboost being installed on an 87 setup, however I'm not sure of how the lines need to run. Can anyone help out with letting me know how the lines need to go? I would appreciate all help as well as a diagram or some pics.

Thanks in advance.

 

[TexasT]

http://www.lspbcforums.net/lspbc.yaf/yaf_postst544_86ing-the-powermaster-for-a-HydroBoost.aspx

Here is a link to our local board with pix and such of my conversion.

If you search on this forum there are a bunch of ways to go about it.
I used factory stuff from an 84 .

Ask up if you have questions.

Oh, and welcome to the forum.

 

[charlief1]

There's a complete write up in the how to section at the top of the general section.

 

[Bob Lob-Law]

TexasT, thank you very much for the link. That has all the info that I need to do the conversion, even a parts list!

Thanks guys, I really appreciate all your help.