Curious what the consensus is for stall speed choice for the Precision Vigilante Lock-Up torque converter.
Back years ago, there was "I Believe" they were defined as follows:
4, 0, 6, 7 where 4 = 2,800 RPM, and each interval beyond that is ~ 200 RPM increase.
This would be for use with the TE-61, Ported Iron Heads and Roller camshaft.
Many Thanks !!!
Back years ago, there was "I Believe" they were defined as follows:
4, 0, 6, 7 where 4 = 2,800 RPM, and each interval beyond that is ~ 200 RPM increase.
This would be for use with the TE-61, Ported Iron Heads and Roller camshaft.
Many Thanks !!!
