Rear end Carrier Upgrade

[Wayne A Bender]

I'm in the process of upgrading my rear end and just want to know which is the best limited slip carrier to go with.

 

[RmvBfrFlght]

If you mean a posi-type unit, then an Eaton unit with disc style clutches.

If you are also getting axles, then get both the carrier and the axles in 30-spline for more strength.

RemoveBeforeFlight

 

[Mr.Spool]

I'm in the process of upgrading my rear end and just want to know which is the best limited slip carrier to go with.

stock rear?if so, eaton posi like suggested,1.3/1.4 60fts were no problem on 28 spline.

 

[michael evans]

If you go with the 30-spline, I have a set of new C-clip eliminators on the shelf.

 

[dank GN]

I went with a eaton tru-trac and haven’t had any issues . Held up to 700rwhp pretty easily . I put moser axles and the tru-trac with stock gears .with C Clip eliminators on the axels

 

[1BUICKTtype]

how important are c-clip eliminators ?

 

[dank GN]

how important are c-clip eliminators ?

Well if you legally want to run at the drag strip per nhra rules any car faster then 10.9 needs them aswell as a 6 point cage aswell as some other stuff . Another thing is that do you really want all the power you are making to be held together by a small 3/16” thick piece of steel . There are plenty of videos to explain what they are and why it’s a good idea to have them if you plan on making some decent power .

 

[gnfanatic]

guys, I remember back in the day people complaining how c-clip's used to leak like a sob. Does that still hold today or has the design been changed?

 

[Nick Micale]

how important are c-clip eliminators ?

Not worth a damn, years ago I broke an axle w/c-clip eliminators leaving the starting line.

The axle stayed in place, but the wheel and flange went down the track, and my car made a hard left turn and took out the 60' lights, and slammed into a Honda broadside?

For a street/strip car, go with the 30 spline axles!

 

[1BUICKTtype]

thanks. yes the plan is the 30 spline set-up with a trutrac, but wondering if i should do c-clip eliminators at the same time.

 

[michael evans]

Not an easy bolt on

 

[michael evans]

What is your rear braking idea ?

 

[movinfast]

Part numbers on the Eaton trutrac?


Sent from my iPhone using Tapatalk