Revolution Dyno on E85!

[Revolution]

So to make a long story short took the car to get dyno'd today, and had some technical difficulties. Only made 2 full pulls as the car was loosing either ground or power and resetting the AEM etc... Also never even had a chance to bring the boost up off wastegate spring. Here is a quick vid of the car and hopefully I well get this electrical problem sorted and get he car tuned. I can say the power and timing this E85 is making is crazy!

Right click and Enjoy

http://talongt66.4t.com/sept%2009%20dyno_0001.wmv

 

[Revolution]

The car made good power at only 6200Rpms that is were my peak power and torque were, usually the car well make peak power upwards of 7800Rpm so these number are off alot. I don't' have the sheet in front of me but it was around 670Ish AWHP and 580 Ft/lbs of torque off the wastegate spring. This was also done on a load bearing dyno that is why the pull is a bit drawn out compared to a dynojet pull. We were only allowing the car to accelerate a set Rpm vs. time to get a better log for tuning.