Rollmaster timing chain >NEW, best one, and Hardened PUSH RODS stock length

[BLACKHAWK38]

AM having fresh 109 build, block has been bored, aligned honed crankshaft apeture;

018 total taken off block and heads,

Thinking of using steel shim head gasket.

1985 HOT AIR intake manifold going on this engine


Using 188/188 .403 lift crylogenicly treated REED cam and REED rocommended valve springs that also get the cold shoulder.

I was told by machine shop that stock length (8.963") PUSHRODS should work fine, but I did not REVEAL that I may use thinner head gasket.

NON-Adjustable STOCK STYLE rocker arms will be used along with GM lifters



PARTS NEEDED AT THIS TIME,set of 12 CHROME MOLY PUSHRODS stock length 8.963" (12)

ROLLMASTER TIMING SET< THE GOOD ONE, I mean the BEST ROLLMASTER for buick V6 even fire,

FRONT TIMING COVER, NEW GM ( GM, not copy
cat and NOT DEEP OIL PUMP GEAR POCKET and NEW GM OIL FILTER COVER with nipple


Please advise where to buy from VENDOR on this board.

THANK YOU , BLACKHAWK 38

 

[TURBOGTA1]

IVE GOT THE PUSH RODS!!!!
E-MAIL ME AT TURBOGTA@AOL.COM

 

[mayosmechanic]

I have a new timing set.Rollmaster.