Scanmaster 2.1, maroon console + a-pillar plastic

[t-typinator]

Like new Scanmaster 2.1,has only a couple hundred miles on it,with direction booklet,has a little glue on the top from mounting,but none on the face, it can probably be removed with something,like goo be gone, or mineral spirits etc. but not sure, its nothing terrible but i thought i should point it out. $175 shipping included.
Also have a real nice,maroon console,I will clean it up + see if i can get some pics,but not sure what to ask for it,i'll have to look around to see what they go for.
Also a maroon A-pillar plastic piece,(drivers side)
feel free to make offers on the console + a-pillar.

 

[FLAT BOOSTED]

scanmaster

sent pm

 

[boostingbuick]

2nd on SM.

 

[TurboTJT]

Next in line for Scanmaster.

 

[t-typinator]

Some pics of the scanmaster,close up pics make the glue look worse then it is,
the glue in the middle that looks like it is from velcro will definetly come off,I just tried rubbing alconol + it will come off the other stuff looks like a sprayon shelac or something,it may take mineral spirits or something like that,or you can just put the velcro + mount it from the top too,or cover it with a turbo sticker.if you look at the close up you can see it is like brand new with very little use on it.

 

[t-typinator]

Man these pics are huge,i'll try to shrink the next ones,but here is the console,it is actually in excellent shape,no damage, with only a slight wear spot on the ashtray cover,which may be replaceable not sure,I probably should have cleaned it up first but here it is.
I will probably clean it in the near future + do more pics.also the a-pillar is for sale too,but not sure what to ask yet for either,any honest suggestions are welcome.

I also have a few other things ,i will probably do another thread later with more pics of each,i just want to clear it all out.
here is a pic of some + there is more,if you see anything you are interested in,let me know but my pm is about full + i will have to empty it later.

Also the darker area at the edge of the woodgrain on the console is just dirt not wear or corosion,i apologise for it being so dirty but i had the camera handy so i took the pics.I really think it is going to clean up really nice.

 

[Steve]

I would like to be in line on the scanmater also. Let me know if it makes it to me and I will paypal you the money. Thanks

 

[t-typinator]

Ok ,dumb question time,why does this console have woodgrain instead of the brushed aluminum look,is this out of another gm brand,or did earlier cars,have that,whats the scoop? I got it with a t-type i bought a while back,+ just tucked it away +it didn't even hit me until i was just sitting in my car + noticed the aluminum or stainless of my console.
I didn't go back out + check but is all that woodgrain area removable to replace it with,the brushed aluminum stuff.

 

[t-typinator]

I believe the scanmaster is sold,I'm told the check is in the mail.

 

[t-typinator]

Ok ,dumb question time,why does this console have woodgrain instead of the brushed aluminum look,is this out of another gm brand,or did earlier cars,have that,whats the scoop? I got it with a t-type i bought a while back,+ just tucked it away +it didn't even hit me until i was just sitting in my car + noticed the aluminum or stainless of my console.
I didn't go back out + check but is all that woodgrain area removable to replace it with,the brushed aluminum stuff.

I went + looked at the console + that whole area with the wood grain does just lift out,ashtray + all so it can easily be switched for the stainless or aluminum looking one,but the woodgrain is kind of nice too +the two could be switched back + forth every once in a while for a change in looks.
i did wash some of the dirt off today + it cleaned up nice but could some kind of cleaner + then maybe some armor all or what ever you use to detail them.
I just used a little water + paper towl to get the loose dirt off of it.
I'm goign to post a new thread later with the new pics + a bunch of other parts i have.

 

[FLAT BOOSTED]

?????

I believe the scanmaster is sold,I'm told the check is in the mail.

How could this be. I was told by u that I was 1st in line and that you would send pics to my email. I never recv'd them but I see they are up here now, and that its sold pending payment. I didnt send payment yet since i was waiting on pics???????????? whats up? LMK

Thanks, Dave

 

[t-typinator]

How could this be. I was told by u that I was 1st in line and that you would send pics to my email. I never recv'd them but I see they are up here now, and that its sold pending payment. I didnt send payment yet since i was waiting on pics???????????? whats up? LMK

Thanks, Dave

Just so people don't think i just sold it out from under him.I made a mistake + thought i was shipping it to him. :redface:
I talked to the buyer on the phone + thought it was flat boosted,who i had talked to earlier via pm,but found out today it wasn't, but it was too late, the other person had already mailed the check,+ i couldn't go back + tell him he couldn't buy it at that point,Sorry Flat Boosted.

 

[TurboTJT]

Just so people don't think i just sold it out from under him.I made a mistake + thought i was shipping it to him. :redface:
I talked to the buyer on the phone + thought it was flat boosted,who i had talked to earlier via pm,but found out today it wasn't, but it was too late, the other person had already mailed the check,+ i couldn't go back + tell him he couldn't buy it at that point,Sorry Flat Boosted.

OK so a mistake was made.
It's not too late, I'm willing to help make this right.

Flat Boosted you can have the scanmaster.
I'll just need you or Dave to send $175 back and then its yours.
PM back and let me know how you guys want to do it.

Regards, -Tim

 

[t-typinator]

OK so a mistake was made.
It's not too late, I'm willing to help make this right.

Flat Boosted you can have the scanmaster.
I'll just need you or Dave to send $175 back and then its yours.
PM back and let me know how you guys want to do it.

Regards, -Tim

Thanks Tim, This wasn't your fault at all so you should recieve what you payed for,It was my mistake.
At this point, I'm just going to finish off the transaction with you.
I apologized to flat boosted + he was very gracious about the whole thing,+ i feel bad because it wasn't his fault either. If i run into another one it's all flat boosted's if he is still looking for one at the time.Once again I apologise to everyone involved.
I'll just have to be more careful next time. :smile:

 

[toribio]

are those rear seat braces in the picture if so i am interested let me know how much shipped

 

[t-typinator]

are those rear seat braces in the picture if so i am interested let me know how much shipped

They are rear seat braces ,but someone is sending me a check today for them.