usetaboost
SAY CAR RAMROD!!
- Joined
- May 4, 2005
I read this information in one of my Pontiac Enthusiast magazines. I do not have any information on what color of dye to use or where to get new release buttons. You may want to contact Kirban or gbodyparts.com for this information. I believe gbodyparts.com has the correct paint for the latch covers though.
1. Start with giving them a good cleaning with soap and water using a scrub brush. rinse with cold water.
2. Check belts for frays thin spots and mold. Replace with a good used belt if needed.
3. If they need to be dyed, use 8 ounces of dye in a roast pan bringing it to a simmer. Fully extend the belts and DO NOT submerge retractors. Let the belts simmer for about a half hour. Rinse thoroughly in cold water. Let dry.
4. Wash belts again in WARM water and mild detergent to get rid of the dye residue. Rinse in cold water and let dry.
1. Start with giving them a good cleaning with soap and water using a scrub brush. rinse with cold water.
2. Check belts for frays thin spots and mold. Replace with a good used belt if needed.
3. If they need to be dyed, use 8 ounces of dye in a roast pan bringing it to a simmer. Fully extend the belts and DO NOT submerge retractors. Let the belts simmer for about a half hour. Rinse thoroughly in cold water. Let dry.
4. Wash belts again in WARM water and mild detergent to get rid of the dye residue. Rinse in cold water and let dry.
