September Fest

[J-B Racing]

Lower intake...if not sold I am interested...are the threads all clean and good? Egr welded?

All the threads are OK and the EGR Hole is still there.

 

[J-B Racing]

First in line for ATI 7"" Balancer $150. Please send Pics

MSD 8551 Distributor Modded for Crank Trigger $120
RJC VC Spacers $50
Crane Solid Roller Lifters $100
RAZOR Alky Tank ( No Leaks ) $50
4"" Sheet Metal Pan ( includes PTS Pick-up and New Gasket ) $150
GM Fuel Hanger with Red's XP Pump $150
3.73 Gears for 10 Bolt ( used from Strange ) $100
ATI 7"" Balancer $150
S/S Thermostat Housing with O-Ring $25
ATR ECM-10 Monitor ( You can still use the o2 and Fan Switch devise ) $100
Re-stalled D5 Converter $175
3.5" Exhaust with Ultraflow ( Custom made to work with the 3.5 GN1 DP $150
2 Sets of stock VC $50 pr
CK Billet Input Shaft for the TH200-4R ( New ) $200
TH200-4R BRF Transmission Billet Parts from CK, best of everything ( Slips a little )
cost me well over $2000................may need to replace some Clutches $1000
9.400" Pushrods $100
Stock Lower Intake ( Match Ported to Stock ) $100
Strange C- CLip Eliminators for Strange 28 Spline Axles $100
Anchor STrap Kit $25
Moroso Vacuum Tank $25
ARP Head Bolts for Iron Heads ( installed never run ) $50
2 Nodular Centerline Wheels 15 x 10 ( 4.5 bs ) like on my sig no scratches or drilled $400
Chrome Blower Motor Cover $20
Chrome Master Cylinder Cover $20
PTE FMIC ( for external Gate, has 2 Alky Holes on the Up Pipe ) $500
Aluminum Transmission Cooler $50
10" Mr. Gasket Electric Fan $50
4" K&N Cone Filter $25
5" K&N Cone Filter $25
PTS 275PSI Regulator Kit ( New ) $50
BRF Governor ( Not Modded ) $50
BRF Gov ( Modded -bigger Hole ) $50
10 Tooth Green Monte Carlo Gov. Gear $35
GN1 3.5DP WG Springs #8 and #20 $10 ea.
======================================
All prices are 1/2 price of new or more
List was too long to post with Pics, so please ask. May take a while.
Shipping NOT included, and will be shipped MAIL to reduce cost.

All pics have been sent except for those I asked for.

 

[J-B Racing]

all pics sent except for those I asked for.

 

[larry33kc]

Sorry. Larry33kc@yahoo

 

[rydersv6]

ic looks good .... pm me your paypal address

 

[FLAT BOOSTED]

in line on lower intake...pics please if available

 

[J-B Racing]

Intake Sold for those who asked.

 

[DGC]

Interested in
3.5" Exhaust with Ultraflow ( Custom made to work with the 3.5 GN1 DP $150
Can you sen d more infor to dgcovell@comcast.net

Thanks
DGC

 

[wile87]

how much would shipping be to chicago for the restalled convertor and billet input?

 

[J-B Racing]

how much would shipping be to chicago for the restalled convertor and billet input?

$55

 

[J-B Racing]

pics of some stuff not sold yet. The 3.5 Exhaust will be sent tomorrow.

 

[J-B Racing]

I am open to package deals..

I have an RCI Blanket out dated like new $50
TH400 stock Chrome Pan $25

Joe

 

[J-B Racing]

Taking offers on what I have left...

 

[Ontbuick]

how much for shipping on arp head bolts and anchor strap ? to omemee ontario canada

 

[Ontbuick]

money order sent today .

 

[J-B Racing]

money order sent today .

Thanks I reserved them for you
---------------------------------------------------

Updates
++++++++
The 4" Pan price has dropped to $100. " That's a deal"
The ATI is a 6" and NOT a 7" Balancer ( I will throw in the MSD Crank Trigger )

 

[LIVE4RDO]

Is the exhaust sold? If not, can I please have some photos to live4rdo@aol.com and is it possible to ship to NY, 10301? Thank you.

 

[J-B Racing]

Is the exhaust sold? If not, can I please have some photos to live4rdo@aol.com and is it possible to ship to NY, 10301? Thank you.

Pics sent. I can meet you at the Champlain Border if it is not too far for you.

 

[LIVE4RDO]

Pics sent. I can meet you at the Champlain Border if it is not too far for you.

500 miles

 

[J-B Racing]

cr

500 miles

crap.. sorry that would be too far.let me see when it's off so I can measure it.