Shortblocks and BRF tranny's delivered to Reynolds

[Grumpy]

ok we have room to bring down some "stuff" I would take all motors apart and check them ..


#1
.040 block with pistons and rods .020/.020 crank . motor ran before taking it apart $350


#2
TTA shortblock 38k std everything ..block, crank, rods and pistons.. $1500

#3
original TTA heads ..$500


#4
shortblock from a 27k Limited .. std everything .. $1000


#5
Weisco .010 pistons
stock rods
.010/.010 crank magged fine
from a 58k car .. pisons have 8k .... $500

#6
stock BRF trans core's..starting @ $500 each

#7 complete power seat set up $350

NO SEATS OR DOOR PANELS

ok enuff for now .. have a lot of parts

 

[GOT JCE]

Parts

Ok Dan, now lets see that basement!!!!!!! :tongue:

 

[ecna]

You should see his Dining Room!

 

[Grumpy]

cut it out !!! hey I am cleaning out slowly I will tell you I can walk down a small path in the cellar and up in the attic :biggrin: Living room is 14X28.. it's the size of a garage so why not use it as one ??? oppps... here comes the wife ... later guys

 

[PaCemkr86]

cut it out !!! hey I am cleaning out slowly I will tell you I can walk down a small path in the cellar and up in the attic :biggrin: Living room is 14X28.. it's the size of a garage so why not use it as one ??? oppps... here comes the wife ... later guys

LOL.. see a pic of the backyard Dan.. the one with the sea of black GN bodys

 

[TT/Ameasap]

Dan, I am interested in these short blocks #2 and #4. Can you give me more info on these? Are they disassembled? Or? need rebuilt?

Thanks

 

[Scott Atk]

How much for the carpet cleaner and the roll of green carpet? Is shipping available to the west coast? Especially on the carpet. Thanks, Scott

p.s. Any door panels available?

 

[Bweavy]

I need driver seats only.willing to pay $75.00 with tracks.
A Complete froor pan including the fire wall Shouldn't be any xtra for that?
I also want 6 driver side doors. NO rust ever. That does include the door panels for that price correct? They do have original GN paint also correct?


Interested in #2 & #4

Also I expect, No, no no,.... I demand a package deal.

Stop on by on your way back if I don't see you down there.

 

[Grumpy]

I need driver seats only.willing to pay $75.00 with tracks.
A Complete froor pan including the fire wall Shouldn't be any xtra for that?
I also want 6 driver side doors. NO rust ever. That does include the door panels for that price correct? They do have original GN paint also correct?


Interested in #2 & #4

Also I expect, No, no no,.... I demand a package deal.

Stop on by on your way back if I don't see you down there.

the package deal is free delivery to Reynolds already sold 6 other motors and 8 tranny's .. may end up just leaving Melissa's car home and take down a full load of parts so I can continue to clean out !! then I can stop on the way home and buy up more stuff on the way !!! hmmmm wait a min... YOU already HAVE !! ahhhh wait a minute ... the med's are starting to wear off now ... who are you ??? do I know you ?? :redface:

 

[Grumpy]

Dan, I am interested in these short blocks #2 and #4. Can you give me more info on these? Are they disassembled? Or? need rebuilt?

Thanks

I would clean them and hone the block and put in new rings and bearings .. unless ya want to just put them back together with the old stuff ?? thats your decision

 

[Junior Samples]

is that a giant fruit bat hanging in the corner? guard bat eh

how much for blank instrment panel, need one to custom fab some analog gauges

 

[Grumpy]

ok leaving Wednesday .. also have std blocks