You can type here any text you want

simple stuff

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

bensttype

New Member
Joined
Jan 20, 2002
Messages
109
Just wanted to share- couldn't figure out what was causing my car to buck (was happening right before the 2-3 and 3-4 shift, and on the highway.) It did through a code 45 once. Finally found out that a the crimp connector on a plug wire was making intermittent contact. Also bolts on the bottom of Ignition modual bracket were loose. A loose modual could cause grounding problems, right? thanks, Ben ----------------------------------------------------------------------------------- '86 ttype : still a rookie but slowly learning more through use of this site 160 stat, new wastegate solenoid, Red's XP, Caspers thumbwheel, new wires and plugs and oil!:D
 
Sure can.Make sure that the bolts are all clean and tight.Check the nuts for the module to plate too.Should be clean and free of corrosion.
I've even heard of guys running a braided ground strap from the module mounting plate to the fire wall.
 
Back
Top