Slow spool source

[Drewster]

I found out why my spool up was so slow ( like 3 sec slow )
I found the waste gate hole had corroded at the bottom. It is about .013 lower than the rest of the face. I guess the car had a lot of starts without letting the motor fully warm up.
I cleaned up the puck and now I'm down to about a 1.5 sec spool up now. It's better but a stock turbo should be quicker. I'll need to rework the face some how.

One for the archives
Andrew


86 T-type modified
86 T-type. Lightly modified

 

[bison]

Send it to me and I'll resurface it


Posted from the TurboBuick.Com mobile app

 

[bison]

It will look like this:

Posted from the TurboBuick.Com mobile app

 

[1fastcobra]

Send it to me and I'll resurface it


Posted from the TurboBuick.Com mobile app

How much?
I have a few housings with that problem.

Posted from the TurboBuick.Com mobile app

 

[bison]

$25 first. $20 each additional. USPS flat rate is best.


Posted from the TurboBuick.Com mobile app

 

[DavidM]

$25 first. $20 each additional. USPS flat rate is best.


Posted from the TurboBuick.Com mobile app

PM sent!