Spare Parts BlowOut!!

[CTX-SLPR]

Howdy,

I'm liquidating my inventory of spare Buick parts, mostly Turbo6 but a few 455 parts in there too.

The List:
Stock 86 bare ECM (never tried it but I'll refund minus shipping if its busted)...$50
Stock 86 coil pack (same deal)... $65
86-87 coilpack mount... $15
SpeedPro HD replacement rockers on HD shafts... $75
Stock crank, water pump pulleys, tensioner, and accessory bracket with the corner broken off ... $70
(still have the piece)
Misc stock stuff from a 4.1... $100
6192 heads complete, balancer, valve covers, flywheel, pushrods, rockers with 2 missing buttons, and anything else I can find that I don't need from it
72 Buick 455 valve covers, bead blasted, light pitting on one other pretty nice... $40
TA 455 engine rebuild kit... $60
all but intake valley pan gasket, bearings, and not sure whatelse, I'll check the box tomorrow.
.030 over 4.1 Speedpro HD cast pistons with pins and stock cam bearings... $70
Solid Roller Stage II race lifters and 3/8" pushrods for stage block and heads... Make offer

Trade items:
production style hydrallic roller lifters, billet Al thermostat housing, valve cover breathers for Poston valve covers

Buyer pays actual shipping to the nearest dollar or can pick up in person. Pictures available upon request.

Thanks,

 

[Intercooled88s]

I'll take the coil pack mount, how much shipped to 01056. Also is this the flat piece and sort of arch piece?

86-87 coilpack mount... $15

 

[CTX-SLPR]

I'll take the coil pack mount, how much shipped to 01056. Also is this the flat piece and sort of arch piece?

86-87 coilpack mount... $15

Its the stock black mount that bolts to the lugs on the intake and then has the single lug on it for the 3rd bolt of the coilpack tray. I never have removed the tray from the pack but I guess they are seperate pieces.

PM me with shipping detials,

 

[Intercooled88s]

Would you sell the tray part for $15+ship.

 

[CTX-SLPR]

Would you sell the tray part for $15+ship.

sure, though I'd like to sell both the bracket arm and the tray. $25 for both plus shipping or $15 apeice plus shipping.

Thanks,

 

[Intercooled88s]

I will take both for $25+ship, how much shipped to 01056.

 

[mikesvwservice]

SpeedPro HD replacement rockers on HD shafts... $75

Can you provide some info on the SpeedPro HD replacement rockers on HD shafts... $75 ???

Like who made them, miles and condition of them, etc.

Serious about buying them - just would like some details.

Thanks.

Mike

 

[CTX-SLPR]

Can you provide some info on the SpeedPro HD replacement rockers on HD shafts... $75 ???

Like who made them, miles and condition of them, etc.

Serious about buying them - just would like some details.

Thanks.

Mike

I believe they are made by SpeedPro, they may be Sealed Power, both of which are Federal Mogul companies so they would be made buy the same facility most likely. They are the HD stock replacement rockers, stock ratio, stock nylon retension system. The HD shafts are manufacture unknown but they are significantly thicker walled than the stock shafts. Miles, 0 to best of my knowledge as I picked them up as guys spares when he went roller. The condition regardless of the mileage is excellent. I have 1.65 T&D's now so I don't need these.

If you need more info please ask, thanks,

 

[mikesvwservice]

I believe they are made by SpeedPro, they may be Sealed Power, both of which are Federal Mogul companies so they would be made buy the same facility most likely. They are the HD stock replacement rockers, stock ratio, stock nylon retension system. The HD shafts are manufacture unknown but they are significantly thicker walled than the stock shafts. Miles, 0 to best of my knowledge as I picked them up as guys spares when he went roller. The condition regardless of the mileage is excellent. I have 1.65 T&D's now so I don't need these.

If you need more info please ask, thanks,

I'll take them. Shipping to 38451 (Culleoka, TN). Give me a Paypal e-mail if you do Paypal or other method of payment with the total. Thanks.

Mike

 

[Intercooled88s]

Let me know total also, and your paypal. thanks

 

[CTX-SLPR]

Will box and get shipping estimates by UPS ground tonight and give you paypal numbers.

 

[CTX-SLPR]

Rockers and coil brackets sold, all else still available

 

[ThikStik]

CTX,
Would you have a knock sensor for 86-87?
Thanks

 

[CTX-SLPR]

not a spare one. I need the one I have for my motor.

Sorry

 

[CTX-SLPR]

Just Added
Partially home ported 8445 heads, bare... $100
Frankg's Stainless midsized Valves... $100

 

[BillyRValentine]

I am interested in the .030 over 4.1 Speedpro HD cast pistons with pins and stock cam bearings... $70. Please let me know what shipping would be to the following address -

529 Morningview Dr.
Montgomery, AL. 36109

I am assuming that Paypal is OK. Thank you for your time.

 

[CTX-SLPR]

I'll take them to FedEx this evening and have a quote for you tonight. If I can get it fast enough I can get it in there today otherwise it will go out on Saturday.

 

[CTX-SLPR]

I will now start hearing offers on any of this stuff. I have sold the pistons, rockers, and coil brackets. I should clarify that the coil also includes the module, if they are even sperable.

Thanks,

 

[tom robison]

would you sell just the belt tensioner? how much?

 

[CTX-SLPR]

would you sell just the belt tensioner? how much?

Sorry its just the pulley not the tensioner itself. If you need just the pulley, give me till Saturday as someone is interested in the whole set and I'll let you know.