You can type here any text you want

sputtering when going into boost

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
ok we swapped in the stock cap to the same position as the caspers cap... no change.
unplugged it... no change.
even tried the stock cap 180 degrees turned... no change.
no if swapping the stock cap on, would we have to go through the setting process for it? or did we just waist a bunch of time with that lol.
 
At this point I would be looking to swap the coil-pak and module with one that is known to be good.

What brand are yours? GM? AC?
 
Back
Top