Stage 2 Bush Top End

[m6z]

Stage 2 top end off a bush series car. Stage 2 heads w/ titanium valves, roller springs, jesel rockers, casting #031. Matching stage 2 oncenter intake, solid roller lifters, push rods & valve covers. $2000.00 obo shipped in the u.s.

Stage 2 offcenter carb intake $90 shipped in the u.s.

 

[m6z]

ttt

 

[m6z]

ttt

 

[m6z]

ttt NEW PRICE $1750 shipped for everything. I also have another set of valve covers and other misc. bolts and gaskets that go with it.

 

[m6z]

Come on guys. Somebody make me an offer on this stuff!!!!!

I don't see myself using it anytime soon.

 

[odell4o8]

whats the combustion chamber CC ?

 

[m6z]

I don't know what the chamber volume is and I don't have way to check them.

 

[m6z]

Make me an offer this stuff needs to go.

Make me an offer this stuff needs to go.

Thanks,
Doug

 

[49-blues]

I trade you for a brand new set of polished Centerline auto drags and MT et drag slicks and sportsman fronts-mounted and balanced and never used. 15 x 8.5" & 15 x 5" with MT tubes.w/shipping . i paid over $1500.

 

[Fat Nat]

This sucks you cant give stage II stuff away.
Id make you an offer but you would want to punch me in the face after I did.

 

[m6z]

Thanks, but no thanks 49-blues. Don't need any autodrags at this time.

 

[Chuck Leeper]

If they are Busch heads, they are likely the smaller chambers, as the compresion was 14:1. Somewhere in the 34CC range, +/-.
The ASA heads were set up as 9:1 heads, and have the larger chambers, in the mid 40cc, as I recall.

 

[m6z]

If they are Busch heads, they are likely the smaller chambers, as the compresion was 14:1. Somewhere in the 34CC range, +/-.
The ASA heads were set up as 9:1 heads, and have the larger chambers, in the mid 40cc, as I recall.

Thanks for the info. The guy I bought them from said that they were off a bush car and the bottom of the intake says bush on the bottom of it.

 

[m6z]

$1,300.00 shipped


Anybody???????????????

 

[49-blues]

Can these heads be reported to lower the combustion ratio? If you decide to part out- i would be interested in the jesel rocker set up.

 

[odell4o8]

stage top end,

Can you post a picture of the combustion chambers? thanks,

 

[1BAD81BU]

You have a PM. Later on, Nick.