T Tbo dan Member Joined May 28, 2010 Jul 11, 2014 #1 Its probably been covered before but I couldn't find it. Can you use stage 1 and 2 pistons and connecting rods in a 109 block?
Its probably been covered before but I couldn't find it. Can you use stage 1 and 2 pistons and connecting rods in a 109 block?
E earlbrown runs with scissors Joined May 26, 2001 Jul 11, 2014 #2 As long as you don't expect everything to be a direct bolt on, anything is possible when building a custom engine (noticed I didn't say 'assembling').
As long as you don't expect everything to be a direct bolt on, anything is possible when building a custom engine (noticed I didn't say 'assembling').
F forcefed3.8's Buckeye Bullet Joined May 26, 2002 Jul 11, 2014 #3 If they are for a 3.8 off center block, there is no difference.
T Tbo dan Member Joined May 28, 2010 Jul 11, 2014 #4 Well pistons and rods don't mention different part numbers as far as an on center or off center. It just says stage 1 and 2... they're wiseco 5120h2 printed on the pistons... no length on the k1 rods. Do the blocks have different deck heights?
Well pistons and rods don't mention different part numbers as far as an on center or off center. It just says stage 1 and 2... they're wiseco 5120h2 printed on the pistons... no length on the k1 rods. Do the blocks have different deck heights?
E earlbrown runs with scissors Joined May 26, 2001 Jul 11, 2014 #5 yes, there's different deck heights.
T Tbo dan Member Joined May 28, 2010 Jul 12, 2014 #7 Well since I can't use them I'll share with my turbobuick brothers. http://pages.ebay.com/motors/link/?nav=item.view&id=271509890002 Stage pistons. Crappy posting but you can read 5120h2 on the piston in the third picture...
Well since I can't use them I'll share with my turbobuick brothers. http://pages.ebay.com/motors/link/?nav=item.view&id=271509890002 Stage pistons. Crappy posting but you can read 5120h2 on the piston in the third picture...
T turboclam Well-Known Member Joined Sep 30, 2003 Jul 12, 2014 #8 His posting shows a pic of a GM 3800 block. He obviously needs to share more info.