turborambler
Member
- Joined
- Feb 10, 2005
I am new to the after market ECU world so forgive my stupidness :biggrin: . Now that being said does anyone have a start up cal file for a FAST(Fel-Pro?) system for a car with the following specifications:
Let me know if you need to know something else about the ECU or my setup to get a good start file.
Car Info:
55 lbs Siemens Injectors
PT-51 Precision Turbo
Stock heads
5” single exhaust
3200 stall – turbo 400 tranny with manual valve body
3:73 gear with 28” tall tires
No a/c
No power steering
No power brakes
Running pump gas for now – sometimes use unleaded race fuel
Car weighs 3200 lbs with me in it
No VSS hooked up for now
The software is version 1.02 windows version of the software.
I just need to get it running and can take a stab at it from there.
Thank you folks for any help or guidance on this!
RossJ
Let me know if you need to know something else about the ECU or my setup to get a good start file.
Car Info:
55 lbs Siemens Injectors
PT-51 Precision Turbo
Stock heads
5” single exhaust
3200 stall – turbo 400 tranny with manual valve body
3:73 gear with 28” tall tires
No a/c
No power steering
No power brakes
Running pump gas for now – sometimes use unleaded race fuel
Car weighs 3200 lbs with me in it
No VSS hooked up for now
The software is version 1.02 windows version of the software.
I just need to get it running and can take a stab at it from there.
Thank you folks for any help or guidance on this!
RossJ
