Stock chrome up-pipe/3 inch chrome up-pipe

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

blackgn231

Money pit
Joined
Mar 28, 2007
Messages
493
Bought it from Kirbans a while back still in good condition with the couplers to go with it they are blue. Asking 50.00 plus shipping not sure how to post the pics. Also have a 3 inch up pipe still on the car just bought it from TR Custom Parts its new but had to cut it about a half of inch back on the throttle body side but still will work. Would like to get 50 for it also plus shipping.
 
pics

up-pipe3.jpg
 
any pics of the actual cut on the 3"? what intercooler was it hooked up to?
 
Bought it from Kirbans a while back still in good condition with the couplers to go with it they are blue. Asking 50.00 plus shipping not sure how to post the pics. Also have a 3 inch up pipe still on the car just bought it from TR Custom Parts its new but had to cut it about a half of inch back on the throttle body side but still will work. Would like to get 50 for it also plus shipping.

I am local id like to get the 3" pipe with couplers and let me know if you have anything else.
 
Let me know if you don't sell the 3 inch crome up pipe.

Thanks,
Marco

T-Top 86 Grand Nationals (63000km) 109 block with weisco forged pistons and 2 billet center main caps, M&A aluminum heads, roller rockers, port match lower intake ,te63 a.r .82, erson 214/214 cam, razor alky injection, 94 octane, hooker cat back with dyno max ultra flow muffers, kenne bell headers, 60 lbs injectors, extender alky chip with 21/19 timing, with a gen 2 with a LS1 maf,thdp, mease 24 row IC, PTC 3200 stall 9 1/2 convertor, Ron Custom max boost brake module, MT drag radials (275/60/15) , rjc power plate, rjc boost controller, zeitronix wideband, HR motor mounts, Weld Drag Lites with skinnies up front, electric exhaust, hr rear sway bar, no front sway bar, 90/10 lakewood in the front and 50/50 lakewood shocks in the rear with energy suspension poly bushings all over, boxed rear lower control arms, Big mouth cold air with an AFE air filter


BEST E/T= Exhaust closed
60FT=1.48 (foot brake on 4 lbs of boost)
1/8= 6.65 at 100 mph
1/4= 10.83
MPH=105.2 (letting off the gas, car was running to lean, double pumper for next year
 
Pm your # and Ill give you a call to work out getting the chrome 3" pipe.
 
Back
Top