Mark Parks
Member
- Joined
- Nov 28, 2008
- Messages
- 533
Does anyone make a fan assembly with a bigger fan to fit the stock radiator?
stock fan assembly
- Thread starter Mark Parks
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
- Joined
- May 26, 2001
- Messages
- 9,208
Here is the best fan set-up I have used:
http://www.summitracing.com/parts/DER-16927/?rtype=10
One of these 2 fans will move more air than a stock fan. On our installations, we have only one come on/off with the computer, the other with a switch when the summer temps are brutal.
When using these on a car with an alum radiator, it is a simple installation as we weld tabs to the radiator to hold the fan. Also, the shroud fits right up to the core as it must for optimum performance.
With a stock radiator, a bracket similar to the stock one can be made for mounting.
The harness is furnished with 2 relays to supply proper voltage to each fan.
This is a perfect mate for the Alrado unit!
http://www.summitracing.com/parts/DER-16927/?rtype=10
One of these 2 fans will move more air than a stock fan. On our installations, we have only one come on/off with the computer, the other with a switch when the summer temps are brutal.
When using these on a car with an alum radiator, it is a simple installation as we weld tabs to the radiator to hold the fan. Also, the shroud fits right up to the core as it must for optimum performance.
With a stock radiator, a bracket similar to the stock one can be made for mounting.
The harness is furnished with 2 relays to supply proper voltage to each fan.
This is a perfect mate for the Alrado unit!
