Suspension / Rear / AMS1000 / TH350 / etc.

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
cool my shop number 860-627-9270 or cell 413-386-6420 miguel. have fam in chi town . i'am a chi town boy myself.;)

Took a look, the rear bumper is nearly perfect, but does have a small scratch on the top about 3 inches to the left of the license plate.

The front bumper is in very good shape, but has 1 screw going through the bumper strip to hold it in place on the driver side, and the top surface is checking / fading a bit. Feels smooth to the touch, and could probably polish better than it looks at the moment, but not perfect. Looks perfect from 10 feet away.
 
Took a look, the rear bumper is nearly perfect, but does have a small scratch on the top about 3 inches to the left of the license plate.

The front bumper is in very good shape, but has 1 screw going through the bumper strip to hold it in place on the driver side, and the top surface is checking / fading a bit. Feels smooth to the touch, and could probably polish better than it looks at the moment, but not perfect. Looks perfect from 10 feet away.

WANT THE BUMMER CALL ME 413-386-6420 MIGUEL.CELL:cool:
 
Cliff what are you doing????????? Man, your worse than me;) Pm me your new plans.. What else do you have for sale?
 
BUFORD - email with pics sent

Eticket - dont have pics of it at the moment, but will get some. Yes it is a direct replacement.

Fatride - Nothing going on here... haha. I am worse than you. I put up the add for the T as a roller, and changed my mind already but cannot delete the post....lol.
 
If 49blues and beamer pass on the driveshaft. I'll put myself in line. $200 + shipping to 34224.
 
PMs replied to

PM sent to 49blues about the driveshaft, I will wait for his response before going to the next in line.

Thank you guys-
 
i have the following for sale, most is at my house in bolingbrook, some is at a friends house and i would have to pick it up.

Heavily braced 8.5" 10 bolt rear with 31 spline axles, spool, c-clip eliminators, girdle, billet caps and yoke, racing studs, etc. Been 1.35 60s at 3550lbs without any problems. Formerly in dave englands tsm combo before i owned it. Also has willwood disc brakes on it...................$1,500 obo

drcth350 transmission with manual valve body and t-brake. Held up to bottom 9 second passes and 1.27 60 foots in my tsm / grudge race car for the past 2 years. Never had a problem with it. Bop bolt pattern stock case...............................................................sold
moly driveshaft for th350 / 8.5 rear (or stock 200r4 with 8.5 rear)...............................................................sold
trz front upper and lower arms with stock spindles and wilwood street disc brakes............................................................sold
double adjustable upper and lower rear control arms (knock offs of wolfs, but work perfectly)................................................sold
ams1000 nib...................................................sold
wilwood manual master cylinder...........................deal pending
rci black plastic 10 gal fuel cell...........................sold
msd 7al2 box...................................................$ 300 obo
twin bosch fuel pumps.......................................sold
(2) cheetah shifters for 350/400..........................$ 100 each
stock turbo buick hood great condition (white).......$ 150 obo
stock t-type chrome bumpers in good condition.......$ 30 each
qa1 shocks single adjustable set of 4 for front and rear.........sold
stock location liquid to air intercooler with water cell........$ 400 obo
griffin radiatior aluminum for g-body with single electric fan...$150
msd crank trigger wheel and sensor for sbc........$50
electric water pump for sbc.............................$100
(6) 160# injectors (work but need new o-rings).......sold
victor race intake for sbc with bbrc fuel rails.........$300
msd billet distributor for sbc set up for cam sync.....$150
chance bolt together 9" converter... Unknown set up....$ 400 obo
may have some other stuff to add to list....

update list
 
paypal sent for the driveshaft-shipping address is: Matt Ardiere , 85 Littlefield Ave , Staten Island , NY 10312-thanks for the deal!
 
paypal sent for the driveshaft-shipping address is: Matt Ardiere , 85 Littlefield Ave , Staten Island , NY 10312-thanks for the deal!

Thank you Matt! If I don't get home early enough from work to ship out this afternoon it will go first thing monday morning-

Cliff
 
Back
Top