turbo billy
Member
- Joined
- Sep 16, 2006
Have parts of a engine build I changed direction on
1. fully ported 8445 irons bigger valves1.77 intake 1.50 exhaust bowl and chamber work done cross overs filled valve guide narrowed bronze guides installed
Intake and exhaust runner short side is done bought from a customer of nick AZ gn setup for roller cam cleaned up and ready to go
Flow numbers are 206cfm intake/ 170 cfm exhaust good looking work said to have mid 10 second runs with a 45a low 20 psi boost
Sold
2. Set of td 1.65 roller rockers complete in excellent shape with solid rjc shafts sold
3. Stock crankshaft cleaned up and checked by lerenzo fast flow in Pennsylvania cut .10/.10 with clevite bearings crank and rods to match
sold
1. fully ported 8445 irons bigger valves1.77 intake 1.50 exhaust bowl and chamber work done cross overs filled valve guide narrowed bronze guides installed
Intake and exhaust runner short side is done bought from a customer of nick AZ gn setup for roller cam cleaned up and ready to go
Flow numbers are 206cfm intake/ 170 cfm exhaust good looking work said to have mid 10 second runs with a 45a low 20 psi boost
Sold
2. Set of td 1.65 roller rockers complete in excellent shape with solid rjc shafts sold
3. Stock crankshaft cleaned up and checked by lerenzo fast flow in Pennsylvania cut .10/.10 with clevite bearings crank and rods to match
sold
Attachments
-
1430270824246.jpg49.5 KB · Views: 341
-
1430270863518.jpg43.4 KB · Views: 331
-
1430270921395.jpg29.8 KB · Views: 348
-
1430271006020.jpg84 KB · Views: 353
-
1430271030189.jpg88 KB · Views: 360
-
1430271064279.jpg97.4 KB · Views: 374
-
1430271107903.jpg84.3 KB · Views: 368
-
1430271128607.jpg74 KB · Views: 364
-
1430271149179.jpg65.6 KB · Views: 351
Last edited: