te-44 what size injectors...

[macatoni]

I have a TTA with lots of mods. A te-44, full ATR exhaust including downpipe, adjustable FPR and wastegate. Green stripe injectors but i dont know what flow rate? Just wondering what size injectors are needed for the te-44....
David

 

[Russ Merritt]

Look for the # on them. Let us know what it is. We can do a search on here to find out what you have.

 

[macatoni]

There are two sets of numbers, the first is 'D1720AA' the second is '621020'

 

[Topjimmy]

Here's what I found by searching your part #: What injectors...?

They appear to be 30 lbs. NOT enough injector for a high winding TE44. Bare minimum should be 36ers, preferably 50's or 60's with a new school chip.

HTH - Jimmy

 

[Slo86GN]

Last time I had a TE44, I went with the 009's (42.5#) and didn't have any issues with fueling. But, considering how cheap you can get a set of 50's, I would go with those to err on the side of caution. It's always safer/easier to pull fuel out than to worry about having enough.

I'm going up to either 50's or possibly the Motron 60's here shortly to support the next round of upgrades. Last TR I had ended up with mod'd ECM and 72's, but it also had a Limit Eng. 45a, FMIC, race port heads, etc...and needed the big squirters. Probably end up going that nuts on this car eventually....lol.

 

[boost86]

009's work great with my TE44

 

[jayG]

Originally posted by macatoni
I have a TTA with lots of mods. A te-44, full ATR exhaust including downpipe, adjustable FPR and wastegate. Green stripe injectors but i dont know what flow rate?
David

Sounds like they are 30lbs. My 84 SVO came stock with the green stripe injectors, which are 30lbs, and T3 Turbo.