these Ebay tial wastegates any count?

[Eric Stauch]

Hey guys, on eBay there's some wastegates for sale that say genuine tail wastegate for like 200 bucks. Anyone run one of these? Also how can I find out what mm I need? I just got a new dp and not sure what size to run. Thanks.

 

[cdr.performance]

You get what you play for. I have had a couple of customers come in with EVERY piston destroyed because their cheap w/g stuck closed. It's insurance get a good American Made unit like a JGS.

 

[Chuck Leeper]

Wasn't it the TIALS that had the sticking problems if run w/ race gas?? Seems you had to make a choice of TIAL part #'s depending on the fuel used??
Google it, and see.

 

[cdr.performance]

I'll put it this way, we don't run Tial. JGS on everything.

As for the e-bay stuff, must guys have too much invested to get to this point to go cheap.

 

[jasjamz]

JGS?? Are these new?

 

[cdr.performance]

JGS?? Are these new?

No. Been around for awhile. Great quality, American Made.
The larger units don't have a Diaphragm to break either!

 

[DCVING 6]

I got my genuine Tial from Precision Turbo for close to that price, no sticking problems here.

 

[Eric Stauch]

Thanks guys, I to believe you get what you pay for, glad I checked into this. As for knowing what size I need like 38 or 44 so on, how do I find that out? Measure the opening on the dp?

 

[cdr.performance]

Assuming this is for the GN. A small gate like a 38~40 would do. We were able to regulate boost down to 5 psi with a 302, 76mm and a single JGS 40mm W/G. It will bolt in place of Tial 38.

 

[SGRIM]

Try PTE new gate. We are using them in place of the turbosmarts now...

 

[DCVING 6]

Thanks guys, I to believe you get what you pay for, glad I checked into this. As for knowing what size I need like 38 or 44 so on, how do I find that out? Measure the opening on the dp?

If it's like the old ATR style pipes (which it probably is), the 38mm should be a direct fit.

 

[TiAL Sport]

Wasn't it the TIALS that had the sticking problems if run w/ race gas?? Seems you had to make a choice of TIAL part #'s depending on the fuel used??
Google it, and see.

if you ran leaded on a street valve (when we had street valves) yes

 

[williamsGN]

You can get a 38mm Tial from cottonsperformance for $229