Today's track runs.

[V6POWER]

Car ran well today and ran its second fastest et with a friend (Pat) driving the car for the first time. He obviously can launch better than I can. :smile: I was running a new set of ported stock heads that Khai in Charlotte, NC had done and they worked real well. I am able to run the same mph at only 23# boost and 23/21 timing whereas I needed to run 26# and 26/22 timing before the head swap to run the same mph.

60'=1.674
330=4.587
et=7.069
mph=99.72

1.655
4.557
7.032
100.04

1.584 (Pat was driving)
4.435
6.914
99.61

 

[vacuum 6]

Looking like a high 10 sec run.

 

[V6POWER]

That's what I figure.

 

[TurboJoe3.8]

Nice runs, Jim! Your car is making good power at low boost!


My new motor that is going in soon has a set of Khai's ported irons on it- hopeing to make some good power, too.

 

[V6POWER]

yangiant51--Thanks and I think you will be pleased with Khai's heads.

I see you are from Boardman.....I graduated from Champion in 1964. I'm old.

 

[TurboJoe3.8]

yangiant51--Thanks and I think you will be pleased with Khai's heads.

I see you are from Boardman.....I graduated from Champion in 1964. I'm old.

Wow Jim, small world! Remember you're always young at heart !

I'm an old timer, too!

Do you ever come back to visit?

Yes, Khai does awesome work!

Joe

 

[V6POWER]

I have not been back in years.

 

[SilverBulletGN]

Nice Numbers!!! Keep it up...

 

[V6POWER]

Thanks SilverBulletGN. I went back for another test and tune and I made two runs:

60'=1.541
330'=4.434
ET=6.932
MPH=98.90

1.602
4.514
7.002
99.37

Temp. was about 10* hotter (75*) than last time. Boost was 23-24 with 23/21 timing. Car is very consistent.

 

[bison]

Thanks SilverBulletGN. I went back for another test and tune and I made two runs:

60'=1.541
330'=4.434
ET=6.932
MPH=98.90

1.602
4.514
7.002
99.37

Temp. was about 10* hotter (75*) than last time. Boost was 23-24 with 23/21 timing. Car is very consistent.

What ex wheel is in your TE61?

 

[V6POWER]

Pte .63

 

[bison]

Pte .63

Thats the housing. what wheel? There are 4 possibilities

 

[V6POWER]

Since I am not sure, tell me what are the four possibilities? :smile:

 

[bison]

Since I am not sure, tell me what are the four possibilities? :smile:

31,52,69,and 76 trims

 

[V6POWER]

I don't have a clue. Is it stamped somewhere on the turbo? I purchased the turbo from Limit in September 2004.

 

[bison]

I don't have a clue. Is it stamped somewhere on the turbo? I purchased the turbo from Limit in September 2004.

Its not stamped. You will need toi look at your receipt or measure the ex wheel

 

[V6POWER]

Receipt doesn't indicate wheel size. Looks like I have to measure it.

 

[bison]

Receipt doesn't indicate wheel size. Looks like I have to measure it.

Id call them first since the housing may be a bitch to get off for measurement

 

[V6POWER]

I called and the wheel is a 69 trim. Is that good?

 

[bison]

I called and the wheel is a 69 trim. Is that good?

Its the same as a PT54 turbo. Its been low tens at 131+. Ive gone 124+ with a PT54 myself. Needs a 3000 stall.