I have a ton of stock parts to get rid of. Prices listed include shipping. Paypal is preferred: blackout87gn@hotmail.com
2 x set of driver and passenger side stock intercooler brackets - $30 pair
Compressor bracket - $15
Heater hard lines - $20
1 stock passenger side valve cover in great shape - $30
3" hard MAF pipe - $20
1st turbo pictured: I "think" it is a TA49, comp wheel is slightly larger than the stocker, spins freely, no shaft play, has Precision .63 housing, looks to be in good shape, $200 OBO
2nd turbo pictured: stock turbo, unknown miles, spins freely, no shaft play, previous owner ran turbo on motor and said it ran fine, comes with adjustable actuator, $150 OBO
stock fuel rail in good shape - $75
egr hold-down bracket - $10
2 x stock injector harnesses in good shape - $40 each
2 x stock tensioner assemblies with pulley - $40 each
stock coilpack and module assembly, previous owner says they worked fine on running motor, $100
stock GM knock sensor used - $25
stock GM IAC sensor used - $20
stock GM TPS sensor used - $20
2 x passenger side brackets with 2 bar MAP sensors and ESC modules, $75 each
stock intercooler fan, $30
stock cooling fan with upper radiator support piece in decent shape, $75
stock upper plenum in good shape, $40
2 x stock turbo question mark brackets, $30 each
1 x Kirban style 3" downpipe with mating flange, pipe has never been ran on car, mounts to stock elbow, $100
1 set of Hooker headers with crossover (4 pieces), a couple of the pipes have a couple dents in them, $75
2 x stock intercoolers in good shape, $75 each
stock accessory bracket, $50
stock downpipe with flange, $50
aluminum stock style up-pipe for intercooler, $25
stock turbo shield, needs to be re-coated but in good shape otherwise, $30
new Spal 11" cooling fan, flows about 1200 cfm, $50
stock throttle body assembly with vacuum block, $50
stock coilpack bracket, $20
2 x stock turbo elbow assemblies in good shape, $40 each
bone stock intake manifold in good shape, $125
2 x EGR sensor assemblies, $10 each
stock crank sensor bracket with sensor, $20
stock crank pulley, $25
2 x set of driver and passenger side stock intercooler brackets - $30 pair
Compressor bracket - $15
Heater hard lines - $20
1 stock passenger side valve cover in great shape - $30
3" hard MAF pipe - $20
1st turbo pictured: I "think" it is a TA49, comp wheel is slightly larger than the stocker, spins freely, no shaft play, has Precision .63 housing, looks to be in good shape, $200 OBO
2nd turbo pictured: stock turbo, unknown miles, spins freely, no shaft play, previous owner ran turbo on motor and said it ran fine, comes with adjustable actuator, $150 OBO
stock fuel rail in good shape - $75
egr hold-down bracket - $10
2 x stock injector harnesses in good shape - $40 each
2 x stock tensioner assemblies with pulley - $40 each
stock coilpack and module assembly, previous owner says they worked fine on running motor, $100
stock GM knock sensor used - $25
stock GM IAC sensor used - $20
stock GM TPS sensor used - $20
2 x passenger side brackets with 2 bar MAP sensors and ESC modules, $75 each
stock intercooler fan, $30
stock cooling fan with upper radiator support piece in decent shape, $75
stock upper plenum in good shape, $40
2 x stock turbo question mark brackets, $30 each
1 x Kirban style 3" downpipe with mating flange, pipe has never been ran on car, mounts to stock elbow, $100
1 set of Hooker headers with crossover (4 pieces), a couple of the pipes have a couple dents in them, $75
2 x stock intercoolers in good shape, $75 each
stock accessory bracket, $50
stock downpipe with flange, $50
aluminum stock style up-pipe for intercooler, $25
stock turbo shield, needs to be re-coated but in good shape otherwise, $30
new Spal 11" cooling fan, flows about 1200 cfm, $50
stock throttle body assembly with vacuum block, $50
stock coilpack bracket, $20
2 x stock turbo elbow assemblies in good shape, $40 each
bone stock intake manifold in good shape, $125
2 x EGR sensor assemblies, $10 each
stock crank sensor bracket with sensor, $20
stock crank pulley, $25
