Hi, could somebody tell me please, what is the torque spec for fastening the rods and mains? I have oliver 6.5 rods and 4 bolt mains on stage 2 oncenter iron block.
thanks
Veljo
What the torque values were when the machine work was done--this should be close
Rods---65-70 ft.lbs.
Mains--90 on the stud nuts
Mains--65-70 on the bolts
All torque values with ARP lube
What the torque values were when the machine work was done--this should be close
Rods---65-70 ft.lbs.
Mains--90 on the stud nuts
Mains--65-70 on the bolts
All torque values with ARP lube