TR6 & Coils install pics

[BOOST N]

 

[69RSCLONE]

That's thinking. 6 coils with almost a stock look to the untrained eye. Like it better than the valve cover mounting. Clutters up the engine too much

 

[SirVeyor]

Nice job.


Sent from my iPhone using Tapatalk

 

[Phoneguy]

That's thinking. 6 coils with almost a stock look to the untrained eye. Like it better than the valve cover mounting. Clutters up the engine too much

Yup, and the wires lay very niceley too

 

[BOOST N]

All the credit needs to go to Jack Laswell in Royce city his work is second to none.

 

[psycho6cyl]

Crap. If I would have thought this I would have never sold my c.o.p. set up. Very nice..

 

[HighPSI]

Jack always does great work!

 

[Knux65]

How would one duplicate that mounting setup? I may be upgrading my ignition in the near future and if I could the TR6 to look like this I'd be a happy camper.

 

[Shawn N]

Looks great Randy!

 

[TURBOPOWERED68]

badass dude

 

[c n avoid87]

View attachment 271257 View attachment 271256

Looks nice n clean, question what size fitting u used to fit the champion fuel rail to the stock line?

 

[BOOST N]

All the fittings necessary for install come with the fuel rail.

I did however change the rear fittings to straight and used non conductive hose.

 

[Boston GN]

Very nice! What fuel pressure transducer is that? I just ordered Champion rails and might as well add a transducer while I'm at it

 

[BOOST N]

Fuel & oil pressure transducers plus wiring all in one kit from Cal Hartline.

 

[Hoffs six]

I have the tr6 and want to do this set up. what year coils are those? what wiring harness did you use? what spark plug wires are those? thanks Bob

 

[BOOST N]

Jack Laswell in Royce city TX would have all the answers to your questions since he is the one that designed and built this mounting setup.

I will talk with him soon and see if he will reply here. I don't want to post his number with out his approval.

The wires are Taylor that he put the coil ends on.
The harness he custom made.

 

[gnjack]

Here is a parts list for the individual coil on box set up.
Bob Bailey. All coil and TR6 box wire terminals and connectors
Amazon 6 Coils GM 12611424
Jegs. 1 plug wire boot kit Taylor 46067
McMaster-Carr. 6 1/2"OD, 1/2" Length, 1/4" screw size unthreaded spacer 93013A330
6 1/2"OD, 7/8" Lenght, 1/4" screw size unthreaded spacer 93013A973
6 Socket Headed Cap Screw 1/4"-20 Thread, 2 3/4" Length 91274A200

What I did was drilled and tapped the lid. Installed the coils and spacers, short spacer on the bottom and long spacer between the upper and lower coil. Placed nuts on the bolts where they protrude through the lid, to lock in place. This was done because the lid is not very thick and I doubt the threads would hold.

 

[Hoffs six]

Thanks Jack....very nice work!!!!

 

[fast86gn]

Damn Jack you beat me to it... lol

Badass build My brother is the best!

 

[GNBRETT]

Don Cruz sells the correct sized plug wires for a clean look and sells a custom made mounting bracket for the TR6/Coil. their for sale on his site