TTA Champion ported heads with Weber Lock wire

[oldwirehead]

I brought these heads (P/N 25536702) from board member Bob Tempest (click on Bob’s name for more info and pics) in Jan 09, they were never installed. I got a complete motor with GN1 heads on it. Need money for a new transmission. The below is from Bob’s ad;
"These heads have been 10.67 at 127 on Bob's car with a 70GTQ turbo at 20lbs. They have dual springs, big valves. Weber Racing in Ohio did the lock wire. EGR hole has been filled by C. Champion Charges $900 for the port job like this. The lockwire for the heads costs $165. Plus the actual cost of the head cores $----"
$850 plus shipping and 3% PayPal Fee.

I have a 62mm throttle body dog house and power plate dog house has been ported to match. $175 shipped to 48 states plus PayPal.
Attached Images

 

[Ken Adams]

Do you have flow numbers for these heads?

 

[Bigjack7440]

Send some pic of the heads to gavinxman@yahoo.com if you would. Also do they have the Champion stamp on them . In other words were they Champion irons or did someone else do the port work and maybe Champion just done the valve job and fill heat risers? Sorry for so many ?s but I am looking for a set of real Champion ported irons. Thanks

 

[Scott89TTA]

Send some pic of the heads to gavinxman@yahoo.com if you would. Also do they have the Champion stamp on them . In other words were they Champion irons or did someone else do the port work and maybe Champion just done the valve job and fill heat risers? Sorry for so many ?s but I am looking for a set of real Champion ported irons. Thanks

No such thing as real Champion ported irons for TTA's...Champion never produced TTA ported irons nor did anyone else...they only do the work on OEM TTA heads. They are not the same as the GN heads.

 

[oldwirehead]

Answers

Let me state these heads are OEM TTA heads P/N 25536702 as stated in the ad. Head work was done by Champion, and Weber Racing did the lock wire work. I have no flow numbers; I didn’t get them from Bob. I’m sorry for any confusion about what these heads are.

 

[Scott89TTA]

nice set of heads...remember when Bob had them for sale...almost purchased them myself

 

[JP112_89]

Heads

So you did not get these heads from Bob?

 

[oldwirehead]

Gotten from Bob

So you did not get these heads from Bob?

"I have no flow numbers; I didn’t get them from Bob."
Yes, I bought the heads from Bob.

 

[oldwirehead]

ttt

ttt