turbo sbc headers

[WeSS]

I bought a set of these ebay headers and did some port work on them. Then I had a friend Tig them up for me to reinforce them. I plan on using them soon. Here are a couple pics.

 

[WeSS]

A close up pic of where I opened up the wastegate hole. They are cheap and you get what you pay for. Had alot of porting to do.

 

[Louie L.]

Wes,
I had a set of the twin turbo F body models I was going to use on my car. The same ones quick 79 uses. I found them to be a very nice header. Yours looks to be made by the same company by the look of the header flange. I didnt use them because of the port size at the header flange. The tubes were 1 5/8s but yet necked down to 1 1/2 inside diameter inside the flange. Is that why you modified yours?

What kinda project are you working on ?

 

[WeSS]

yes

Wes,
I had a set of the twin turbo F body models I was going to use on my car. The same ones quick 79 uses. I found them to be a very nice header. Yours looks to be made by the same company by the look of the header flange. I didnt use them because of the port size at the header flange. The tubes were 1 5/8s but yet necked down to 1 1/2 inside diameter inside the flange. Is that why you modified yours?

What kinda project are you working on ?

for the money I could not complain. Then put a little work in them. Yes that is why I did that. It is going in a turbo sbc g body.

 

[Louie L.]

They well worth the money even with a little of work put in them. If my heads would have had the smaller exhaust port I would have used them for sure.

Got any pics of that project.

 

[WeSS]

turbo sbc

They well worth the money even with a little of work put in them. If my heads would have had the smaller exhaust port I would have used them for sure.

Got any pics of that project.

once it gets moving I will post up some pics. It is an 88 montecarlo ss with a bunch of nice stuff done to it already. Not going to be a little m or world products race block. All economy stuff and see how far it will take me.

 

[kingots2004]

i run the patriot chevy tight tuck stainless headers flip upside down and they work great for 389.00 .my car went 9.35 at 122 lifting at 18 psi.went 122 in the 1/8th on the same pass 400 small block 3000lb car 91 mm turbo

 

[chris718]

anyone know where to find a set up for a single turbo sbc?

 

[88502]

chris781
I found this on ebay

eBay Motors: SBC Chevy 350-400 Single Turbo Conversion Upgrade (item 150255015510 end time Jun-10-08 17:01:20 PDT)

Bill (88502)

 

[bodycount]

Wes88 can you post some pics when you get the headers mounted. Is it a driver or passenger side turbo.

 

[WeSS]

headers

Wes88 can you post some pics when you get the headers mounted. Is it a driver or passenger side turbo.

I sold them on ebay a couple months ago. I first posted on here with no luck. By the way it was a passenger side mounted turbo. T4 flange.

 

[dfisher]

Headers

I was the one who purchased the headers,

I will post photos as I get closer. I have trial fitted the headers and it was a bit of work to get them on but I expected that since no one offers a bolt on kit for us g body guys.

just a few more parts left and it should be finished.

They will be on my 1988 olds cutlass my combo is a 89 roller cam 350, th400 3,200 stall ,8.5 rear with 3.73,we are going to give e85 a try just need to decide on which carb to get most likley I will giving csu a call here next week and see what they recomend.

 

[bodycount]

Please do post pics when you can. What kind of mod did you have to do to get them to fit? Also do they work with standard acc, a/c, powersteering etc?

 

[dfisher]

Headers

Here is the first photo of the headers installed on the car with the turbo. I will post what I did to get them to fit. I was not much but it did take a little work. I decided aginst the carb and went with megasquirt and tpi.

 

[dfisher]

Headers

Photo

 

[turbotech]

anyone know where to find a set up for a single turbo sbc?

You can try Deeds Performance. Here are some pics of there BBC headers.