Turbonetics cheetah stage 1 turbo

[JohnE87]

Looking for some info on this turbo. I have done several searches and haven't been able to turn up much information. Would like to know what it is capable of. E/t goals currently are to break in the mid 11s. Will be ordering alky control, 60# injectors, and TT chip.

 

[1986 Buick GX1]

I would call Jack or Brian at Cottons Performance. They are a Turbonetics dealer.

http://cottonsperformance.com/

I'm sure others will chime in as it was a fairly popular turbo back in the day.
I remember guys running it, but that's all I know.

 

[JohnE87]

I would call Jack or Brian at Cottons Performance. They are a Turbonetics dealer.

http://cottonsperformance.com/

I'm sure others will chime in as it was a fairly popular turbo back in the day.
I remember guys running it, but that's all I know.

Okay Thankyou previous owner installed it on my car brand new shortly before I bought the car.

 

[V6sleeper]

Basically a 5957e cast compressor wheel equivalent to a te-60 in flow 57-60lb/min, needs a 2800 stall to work good, should get you into the mid 11s but the boost needs to be pushed over 25psi if you have un-ported stock heads.

 

[JohnE87]

Okay so I am set up pretty well.

 

[Mr.Spool]

Okay so I am set up pretty well.

for your goal of mid 11s thats enough turbo

 

[V6sleeper]

Okay so I am set up pretty well.

You should be deep in the 11s spraying alky or with high octane, tuned of course.

 

[JohnE87]

You should be deep in the 11s spraying alky or with high octane, tuned of course.

Great to hear we will see when I get all my parts together