twin turbo

[gnryder]

is it alot of work to run twin turbos on a stock motor

 

[Junior Samples]

3 rolls of duct tape, muffler repair kit and some mighty mendit, looking at a sunday's worth of labor

Post back with pics when its done!

 

[Fachie Motion]

3 rolls of duct tape, muffler repair kit and some mighty mendit, looking at a sunday's worth of labor

Post back with pics when its done!

Don't 1/2 ass it. Use 5 rolls of duct tape

 

[joe_schindler]

If you’re going first class; use new bailing wire too. You can’t count on the used stuff being the length you’ll need anyway.

 

[Turbo6Smackdown]

Is it easy? That all depends on your skill level... I know that's not what you were hoping for but.. It's all I got. It's not THAT hard.. though, you should stick with really small turbos.. they spool a hell of a lot faster, and if you go too big on each, with a stock block, you'll blow it up in a million pieces..

 

[turbofabricator]

Mine was a CRAZY amount of work. But that is how to make it look nice. If you have the time and fabrication skills, go for it. It will NOT be faster than a good single, but will look cooler if done right. It would be easier if you can live with out AC and power steering, and place one on each side. I wanted to make it a simple bolt on deal. I would sell you my complete car or just the system, for the right price. I just installed a FAST system with 83lb./hr. injectors, too.

http://www.turbobuick.com/forums/general-turbo-buick-tech/221466-new-twin-turbo-headers.html

http://www.turbobuick.com/forums/turbo-lounge/192814-alcoholic-twins-turbos.html

 

[JayC]

We built a kit for Shane's car. Unfortunately the motor was toast when we started it up.

Our kit put a turbo on both sides with Tial 38mm wastegates.

Its for sale if anyone is interested.

 

[joe_schindler]

So; how much duct tape did that take you? More than a Sunday's worth also I'm guessing.

 

[GNBRETT]

We built a kit for Shane's car. Unfortunately the motor was toast when we started it up.

Our kit put a turbo on both sides with Tial 38mm wastegates.

Its for sale if anyone is interested.

So what ever happened to this project? I thought u guys were gonna market this for sale?

 

[JayC]

So what ever happened to this project? I thought u guys were gonna market this for sale?

It got put on the back burner. We're still going to but we'd just build another system. We learned a lot doing this kit and while this one is 100% functional, we'd make some minor changes to the next one.

 

[GNBRETT]

It got put on the back burner. We're still going to but we'd just build another system. We learned a lot doing this kit and while this one is 100% functional, we'd make some minor changes to the next one.

Ok, kool. I look foward to spending more money....:biggrin: