U joint for aluminum driveshaft - twisted yoke

[rwrows]

i bought an aluminum d/s that came out of an 8 second GN. It's in good shape but when I went to install it I realized the yoke was twisted because I couldn't get it to slide all the way into the trans.

Anyway, I assumed that my stock yoke would work but when i had my rear built the guy at the performance shop told me that my stock yoke wouldn't fit.

any advice on what to do here? where can i pick up a yoke capable of a 10 second TR

here are some pics. thanks!

 

[SSedan64]

Your stock yoke will work but, you'll need a conversion U-joint. Probably 3R to 1350 size. A new Yoke with the larger U-joints will be stronger.
Check here to see what size you have/need.>> TCI - SLIP YOKES and U-JOINTS: Applications

 

[rwrows]

Your stock yoke will work but, you'll need a conversion U-joint. Probably 3R to 1350 size. A new Yoke with the larger U-joints will be stronger.
Check here to see what size you have/need.>> TCI - SLIP YOKES and U-JOINTS: Applications

thank you!!