UPDATED LIST:
I’m building a V8 conversion car. The donor car in quesiton is a 18,750 mile (not a typo – real miles) 1986 T-Type. Parts are stock unless noted. Parts are on Vancouver Island, BC, Canada. Can ship most, but big items (for example, the hood) are likely best picked up. Currently, I have the following pieces available for sale:
(1) torque converter - $150
(2) torque converter dust cover - $10
(3) transmission dipstick & tube -- $25
(4) flex plate & hardware - $35
(5) starter & hardware - $50
(6) hoses – power steering, a/c, misc. - $25
(7) transmission crossmember & mount – $40
(8) driveshaft - $50
(9) trailing arms, boxed with revised pickup point (appear to be Southside Machine, or ?), gold cad plated. $125
(10) air conditioning compressor - $100
(11) air conditioning box top cover (@ firewall) with printed circuit board- $25
(12) air conditioning drier - $50
(13) air conditioning condensor - $50
(14) air conditioning evaporator core - $50
(15) heater core - $50
(16) heater blower motor with fan - $19
(17) air conditioning controls (digital) w/ wiring harness and vacuum control module - $200
(18) cruise control - $75
(19) cruise control, spare - $75
(20) shifter, complete with cable - $75
(21) hood, no latch or spring or rear trim or hood pad, but with emblems (gray in color, small dent at nose, likely from closing) - $250
(22) power steering pump - $50
(23) power steering reservoir - $15
(24) radiator, bare - $200
(25) electric fan assemblies with shroud – $100
(26) intercooler assembly, complete w/ shroud & brackets - $200
(27) evaporative emmission system (complete) - $15
(28) upper/lower rad hoses, used (two sets) - $25
(29) air intake breather setup, K&N - $35
(30) auxiliary trans cooler (Art Carr) - $55
(31) Bosch (stock) fuel pressure regulators X2 (appear NOS) - $25 each
(32) Walbro fuel pump (in tank) - $50
(33) front sway bar with hardware - $65
(34) rear sway bar - $40
(35) hot wire kit - $50
(36) “S” tubes, used (nice condition) - $10 each
(37) vacuum reserve cannister (ball) - $10
I’ll have more parts available later (rear axle, suspension, T-Type wheels, etc.) as the project progresses. Thanks for your time. Please call or e-mail for more information.
Contact: Wayne
E-Mail: Restorer@shaw.ca
PH: 250-743-9363 (West Coast)
I’m building a V8 conversion car. The donor car in quesiton is a 18,750 mile (not a typo – real miles) 1986 T-Type. Parts are stock unless noted. Parts are on Vancouver Island, BC, Canada. Can ship most, but big items (for example, the hood) are likely best picked up. Currently, I have the following pieces available for sale:
(1) torque converter - $150
(2) torque converter dust cover - $10
(3) transmission dipstick & tube -- $25
(4) flex plate & hardware - $35
(5) starter & hardware - $50
(6) hoses – power steering, a/c, misc. - $25
(7) transmission crossmember & mount – $40
(8) driveshaft - $50
(9) trailing arms, boxed with revised pickup point (appear to be Southside Machine, or ?), gold cad plated. $125
(10) air conditioning compressor - $100
(11) air conditioning box top cover (@ firewall) with printed circuit board- $25
(12) air conditioning drier - $50
(13) air conditioning condensor - $50
(14) air conditioning evaporator core - $50
(15) heater core - $50
(16) heater blower motor with fan - $19
(17) air conditioning controls (digital) w/ wiring harness and vacuum control module - $200
(18) cruise control - $75
(19) cruise control, spare - $75
(20) shifter, complete with cable - $75
(21) hood, no latch or spring or rear trim or hood pad, but with emblems (gray in color, small dent at nose, likely from closing) - $250
(22) power steering pump - $50
(23) power steering reservoir - $15
(24) radiator, bare - $200
(25) electric fan assemblies with shroud – $100
(26) intercooler assembly, complete w/ shroud & brackets - $200
(27) evaporative emmission system (complete) - $15
(28) upper/lower rad hoses, used (two sets) - $25
(29) air intake breather setup, K&N - $35
(30) auxiliary trans cooler (Art Carr) - $55
(31) Bosch (stock) fuel pressure regulators X2 (appear NOS) - $25 each
(32) Walbro fuel pump (in tank) - $50
(33) front sway bar with hardware - $65
(34) rear sway bar - $40
(35) hot wire kit - $50
(36) “S” tubes, used (nice condition) - $10 each
(37) vacuum reserve cannister (ball) - $10
I’ll have more parts available later (rear axle, suspension, T-Type wheels, etc.) as the project progresses. Thanks for your time. Please call or e-mail for more information.
Contact: Wayne
E-Mail: Restorer@shaw.ca
PH: 250-743-9363 (West Coast)
