Upper Dash Screws

[HotAirWH1]

Well, I did it again. I hate getting old. Lost / misplaced the Upper Dash screws (the 5 - standard hex head with torx drive screw) for the plastic panel covering the speakers. Could someone tell me the size and length of the screws so I can hunt them down or have some extra laying around they would like to sell. Thx for any help.

 

[grass doctor]

those babies are hard to find I have a few will take a pic for you and measure but I couldn't find any sort of replacement for the oem
found some on evil bay for a pretty penny

 

[KC87]

And use a magnetic screw driver bit.

 

[grass doctor]

ill send some pics in a sec

 

[grass doctor]

 

[grass doctor]

very rare LOL

 

[HotAirWH1]

View attachment 343408

Is that a 1/4" drive head and a T20 torx ???

 

[grass doctor]

1/4 " head yes, I don't know on torx sizes I just put whatever fits in it , idont even think my torx bits have numbers I got them from a bum who sells tools outside of harbor freight LMAO

 

[HotAirWH1]

I'v been all over the internet and searched all the screw joints and can't find this animal. You'd think with all the G-Body's built these things would be laying around everywhere. Their probably hanging out with the ones I lost

 

[grass doctor]

yes its a t-20

 

[grass doctor]

I'v been all over the internet and searched all the screw joints and can't find this animal. You'd think with all the G-Body's built these things would be laying around everywhere. Their probably hanging out with the ones I lost

oooohhh no my friend like I said another stupid rare piece of hardware on these cars

 

[HotAirWH1]

The search continues. Probably should just buy a parts car. I'm sure my wife would be pleased.

 

[grass doctor]

there you go keep it OEM

 

[Buckshot G/N]

I did have have a set of those years ago, I will try to find them tomorrow. wish me luck.

 

[HotAirWH1]

GOOD LUCK !!!!!!!!!!!

 

[HotAirWH1]

Came across these. They are not OEM, but may have to do for now until Buckshot finds his. The glass is out of the car right now and the upper dash is easily accessible for installing. Ounce the glass goes in it's going to be a pain in the ass to replace the screws so I just as soon put the right ones in in the first place. I'm still pursuing the correct screw's ( need 9 - includes mounting the speakers). The only thing I'm worried about on these replacement screws is the thread count (18 per inch) not knowing what the OEM's are. If I install them and then replace them later am I going to screw things up ??? Pardon the pun......

 

[SpeedRacerX]

You checked with Kirban?

Sent from my SM-G965U using Tapatalk

 

[Reapersgbodys]

Au-Veco will have the screws your looking for, the only issue, is you have to buy them thru a distributor, check they’re website for a dealer local to you, they have just about every, bolt, clip or screw needed for our cars.

 

[Buckshot G/N]

I check in my garage last night where I thought the screws would be, a no go ! I still have another area I need to check as well ??

 

[grass doctor]

they are not bad to install with glass in just need a swivel on socket