Vacuum Manifold Mounting Locations

[mtocrs1]

Where are you guys mounting your vacuum manifolds if you are using one?
Let's see some ideas.


Sent from my iPhone using Tapatalk

 

[Night_train01]

I removed the manifold and tapped my lines directly into the intake plenum

 

[Boston GN]

Firewall to the right of the coil pack

 

[dank GN]

Mine is coming right off my 1" spacer

 

[robertf]

Mine is coming right off my 1" spacer

+1.

 

[mtocrs1]

Sorry for the confusion guys, I already have the intake manifold tapped for a few ports but I am thinking about installing a remote vacuum Manifold. Looking on mounting ideas for the Manifold itself.

Sent from my iPhone using Tapatalk

 

[dank GN]

Sorry for the confusion guys, I already have the intake manifold tapped for a few ports but I am thinking about installing a remote vacuum Manifold. Looking on mounting ideas for the Manifold itself.

What are you going to be runing off that manifold ? If you where going to be runing your map off it . I would personally want it as close to the sorce as possible . As far as mounting it put it where ever is the most convenient for you to access . I'm a actully going to be pluming a Intake Manifold with individual throttle body's so I will need a vacuum block to get a map reading . I found this pretty cool setup

Sent from my iPhone using Tapatalk

 

[87national55]

Is there a How To: on this??

 

[earlbrown]

I put one in the how-to section but I didn't use a remote block.

The only think I would have done differently was to use straight 3/8" fittings instead of the 90's. I didn't have a complete car to look at when I did it, so I had to guess which one would work better.

 

[Gene Van Horn]

Hey Boston GN, that engine looks awsome, nice job there.

 

[Turbo6inKY]

I made a bracket out of some scrap steel and attached it to the passenger side of the plenum.

 

[HouTX87]

Subscribed

 

[87national55]

Thanks Earl! I’ll look for that.