valve job cost

[SIXBANGR]

whats it cost now days? 3 angle, should need no parts but seals. Heads are off the car.

 

[charlief1]

I've got a shop here that can replace guides, cut for the better seals and lift height, and do a 3 angle valve job with a back cut on the valves for around $120 each. I supply all the parts though.

 

[ttaowner]

I had a set done about a year ago. Cleaned, magged, 3 angle valve job and I supplied the springs and I think I had to buy 1 valve and it was about $280 I believe for the pair. Pretty comparable to what Charlie was saying. Price could vary a little depending on where you live and what you may need.

 

[Jerryl]

I had a set of heads completely done for around $240 with a constant radius seat.