Alaskabuick
Member
- Joined
- Jul 4, 2004
- Messages
- 699
I have some extra valve springs laying around and need some details to see if they will work on my stock Turbo T to replace the original springs. The car has about 65k on it and seems to nose over at higher rpm.
One of the sets are some bee hives (cant remember what color stipe and cant tell now).
What seat pressure at what height should I look for on a stock head, is there approx standard installed height.
I know I could probably just measure but thought I would take the easy road and ask here 1st.
What pressures would be acceptable? Open/closed? and at what height?
How far from coil bind should we stay?
What is the lift of my stock cam (at the valve) with stock rockers?
thanks guys!
Dennis
One of the sets are some bee hives (cant remember what color stipe and cant tell now).
What seat pressure at what height should I look for on a stock head, is there approx standard installed height.
I know I could probably just measure but thought I would take the easy road and ask here 1st.
What pressures would be acceptable? Open/closed? and at what height?
How far from coil bind should we stay?
What is the lift of my stock cam (at the valve) with stock rockers?
thanks guys!
Dennis
