I have been reading alot in this section man I am getting excited out doing this conversion. The metal fab wont be a problem for me. I have an 85 GN and as we all know if I want to make it run any good numbers at the track I will have to do a motor,wiring harness, and ecu swap anyway so.......
Here is what I am thinking:
4.8 or 5.3 vortec motor
Will I need to relace the intake manafold due to it being plastic under boost?
4l80e or 4l60e
Single Turbo (Not sure on the size any suggestions)
upgraded injectors (Not sure on the size any suggestions)
Turbo headers (anyone make any if not I can fab something or hack up something)
new driveshaft
fab a trans cross member
considering an IC
Any advice or suggestions are welcome.
Here is what I am thinking:
4.8 or 5.3 vortec motor
Will I need to relace the intake manafold due to it being plastic under boost?
4l80e or 4l60e
Single Turbo (Not sure on the size any suggestions)
upgraded injectors (Not sure on the size any suggestions)
Turbo headers (anyone make any if not I can fab something or hack up something)
new driveshaft
fab a trans cross member
considering an IC
Any advice or suggestions are welcome.