What hard parts to order...

[S10xGN]

Hi All,

I'm getting ready to go through my "CQ" tranny (from an '85 MCSS) that will reside in front of a 2004 LS-1 motor in my old street rod. I *was* going to turbo the motor (and still might), but for now just a big cam and heads will do. I already have my 3600 VIG converter and the flywheel and spacer needed to mate this up, all checks out perfect with 0.080" clearance between the flywheel and converter.

I need opinions on what hard parts to go with either way and what special tools I *really* need (I'm pretty handy at building stuff). I already have Chris's manual plus the ATSG book.

Thanks!

 

[turbocody]

forward drum! input shaft also....but if ya go turbo later i would do both!

 

[bison]

Front carrier and ring gear will need to be replaced for the turbo app. as well as the parts listed above. Call Chris for info about trans brakes.

 

[S10xGN]

Thanks much! Hope others will respond too...

 

[chris718]

e4340 shaft forward drum should be mandatory,as well as a quality recalibration kit.