what is the best manual boost controller ?

[bpman1234]

yea been wanting to do something with it but not sure what way to go electronic or manual .thanks in advance .

 

[Boost231]

Best for what? That's a loaded questions. Best for a 9sec car is going to be different then best for stock car. What's your current setup

Posted from the TurboBuick.Com mobile app

 

[earlbrown]

That's like saying 'What's the best tit size'. There is no one right answer.

 

[bpman1234]

haha as long as they don't have nipple's for tit's .well my car is street not alot of mods stock turbo 28 stall 60 injectors 62mmtb gen 2 31/2''maf pl lc1.i was looking at that grimm speed for the manual one cause it has numbers on the boost dial .i dont know if the hallmans has the numbers .

 

[earlbrown]

If it has numbers on the dial. I'd probably avoid it. There's no way they can be accurate on all installs.

 

[bpman1234]

so what are people using for the manual boost controllers the electric ones are pretty expensive

Sent from my LG-MS910 using Tapatalk 2

 

[626gn]

RJC is popular. Simple and works well. I'm sure others will chime in on their favorites.

 

[Boost231]

Why do you need one? What's wrong with just using a adjustable wastegate? With your current mods and all

Posted from the TurboBuick.Com mobile app

 

[BobbyBuick]

I run a perrin Boost Controller and a stock wastegate .I dont want to shut the puck up by shortening the rod and use the manual controller to hold the wastgate closed longer at the line on the 2 step.I know all the experts can go ahead now and tell me it will never work but i have used this type of cheap ass control forever with solid boost numbers all the way down the track.From last friday 9.60 on street radials

Never once forgot to turn it on, set it ,or adjust it

 

[bpman1234]

I have an adjustable waste gate just want to upgrade the way i set my boost going e85 soon.so want to make it easer to tune and set my boost.

Posted from the TurboBuick.Com mobile app

 

[wb's87]

I have an adjustable waste gate just want to upgrade the way i set my boost going e85 soon.so want to make it easer to tune and set my boost.

Posted from the TurboBuick.Com mobile app

I don't think you can get much easier than this or any other manual boost controller. They all pretty much work the same.


Sent from my iPhone using Tapatalk

 

[Ed Valvo]

Hey guys, how does the RJC and Perrin work with varying temperatures? Had a few PSI less boost with 30 degrees higher temperatures. It would be nice to have it more consistent.

 

[TTA308]

Hey guys, how does the RJC and Perrin work with varying temperatures? Had a few PSI less boost with 30 degrees higher temperatures. It would be nice to have it more consistent.

What do you have now ?

 

[bpman1234]

what do you do with the hose coming from the y hose plug it ?

 

[Ed Valvo]

What do you have now ?

RJC and stock style wastegate actuator.

 

[wb's87]

what do you do with the hose coming from the y hose plug it ?

You don't use the y adapter. One line to the actuator. One to the turbo.


Sent from my iPhone using Tapatalk

 

[dank GN]

I used my Turbonetics for years no issues . I'm selling it steped up to Eboost street

 

[bpman1234]

ok thanks.

 

[V6POWER]

Hallman: http://www.hallmanboostcontroller.com/

 

[TTA308]

RJC and stock style wastegate actuator.

I have a RJC as well and never noticed it dropping due to temps but i also have a single nozz. Alky and a Dutt neck TTA IC.