Jun 21, 2010 #1 H HyperV6 Member Joined May 5, 2004 Messages 529 Guys, which pan gaskets are best to use with the metal spacer plate (to give clearance for using a 700R4 filter in a 200R4 trans) cork or fiber type? Thanks, Craig
Guys, which pan gaskets are best to use with the metal spacer plate (to give clearance for using a 700R4 filter in a 200R4 trans) cork or fiber type? Thanks, Craig
Jun 21, 2010 #2 S SSedan64 JoaTMoN Joined Dec 8, 2007 Messages 1,590 CK's uses cork gaskets. Pic >> www.CKPerformance.com
Jun 21, 2010 #3 B bison Moderator Staff member TurboBuick.Com Supporter! Joined Dec 19, 2005 Messages 18,053 Duraprene gaskets. The same ones he supplies with the spacer.
Jun 21, 2010 #4 B bison Moderator Staff member TurboBuick.Com Supporter! Joined Dec 19, 2005 Messages 18,053 SSedan64 said: CK's uses cork gaskets. Pic >> www.CKPerformance.com Click to expand... They are not cork.
SSedan64 said: CK's uses cork gaskets. Pic >> www.CKPerformance.com Click to expand... They are not cork.
Jun 21, 2010 #5 S SSedan64 JoaTMoN Joined Dec 8, 2007 Messages 1,590 Thanks Bison, I was just going by the Picture, looked like Cork to me? Are those Duraprene? Todd
Jun 21, 2010 #6 B bison Moderator Staff member TurboBuick.Com Supporter! Joined Dec 19, 2005 Messages 18,053 SSedan64 said: Thanks Bison, I was just going by the Picture, looked like Cork to me? Are those Duraprene? Todd Click to expand... Yeah. They are are very fine fiber and seal very well.
SSedan64 said: Thanks Bison, I was just going by the Picture, looked like Cork to me? Are those Duraprene? Todd Click to expand... Yeah. They are are very fine fiber and seal very well.
Jun 21, 2010 #7 H HyperV6 Member Joined May 5, 2004 Messages 529 I just bought two new fiber type gaskets - made by FarPak. Any experience with this brand - FarPak? They look really nice. The shop that built my 200R4 had one cork and one fiber with the spacer. Thanks for the info, Craig
I just bought two new fiber type gaskets - made by FarPak. Any experience with this brand - FarPak? They look really nice. The shop that built my 200R4 had one cork and one fiber with the spacer. Thanks for the info, Craig
Jun 21, 2010 #8 M Mathias New Member Joined May 19, 2009 Messages 20 FarPak are a very good seal for the oil pan. Torque to 75/110 inch pounds. They stay sealed. We use on our 200 4R OEM trans pans.
FarPak are a very good seal for the oil pan. Torque to 75/110 inch pounds. They stay sealed. We use on our 200 4R OEM trans pans.
Jun 21, 2010 #9 C chris718 Active Member Joined Dec 10, 2002 Messages 5,356 75 TO 110 " pounds is low.I suggest 170 to 185" pounds.Like Brian stated,Durapreme is my choice for the gaskets .
75 TO 110 " pounds is low.I suggest 170 to 185" pounds.Like Brian stated,Durapreme is my choice for the gaskets .