Whats the risk of a hard parts breakage wreaking the converter

[Warrant]

Title pretty much says it. If you break a input shaft, the OD carrier, or the OD ring gear, What the chances of wreaking the converter as well?

 

[turbo nasty]

Problem is the metal pieces that get in the conv. If its a l/U then the metal could get embedded in the lining and then as it wears release it into the fluid and block valves and passages.
Also the convertor has to be cut open to be cleaned out.

 

[Alky V6]

About the only hard part breakage scenario in a 200-4R that you might get away with would be when the intermediate shaft snaps with a clean, flat break. That's about it.