Where Can I find

[quickt]

Where can I find aluminum pipe in 4" for like intercoller or inlet piping. Also elbows and other. Looking to make my own inlet pipe.

 

[Quick6'n'-K.C.]

http://shop.airflowonline.com/Merchant2/merchant.mv?Screen=CTGY&Store_Code=AFSI&Category_Code=IT

www.airflowonline.com

you might check that site out, not sure if they have prebent 4 inch, but they do sell 4 inch aluminum in the intake tubing section

BW

 

[86brick]

This is a nice straight 4" inlet pipe for guys that don't use a MAF sensor...... http://www.buickgn.com/4inchinletpipes.htm

You can even get a nice chrome plated one

Just figured I'd mention it cause it might save you some time and trouble

 

[quickt]

I was thinking about that cold air kit but I dont like the connector in the inlet pipe like where the MAF would be. I also have a Champion a/c delete bracket and there is no need for the bend to get around the belt tensioner any more. I have found the alum pipe now I need to find alum elbows and I am in there. Where do the guys that make intercooler pipes and such get this stuff at?

 

[86brick]

Here is 4" aluminum elbows....

http://www.extremecustommarine.com/...M&Product_Code=109-101&Category_Code=EXSTCOMP

 

[Lee Thompson]

ells

H-P PRODUCTS
Louisville,Oh.
1-800-860-8823
They have 4 in. ells in 4,6,8,9 and 10 in. radius and 10,11,14 and 16 gauge thickness.
How about giving me a call tonight as I/m ready for the brake.