Will I see 11, o's with this combo

[V8killR4U]

With the addition od some C16, slics, trans brake and 30lbs of boost will I see 11, o's.

I was going to break into the motor to achieve my goals by adding heads, and a cam. But if i can get to 11' o's or real low 11's then I might just take that money and get the above, slics, and a trans break.

I just dont know if i should build or not? I mean I want real low elevens maybe a 10 something off my combo. I heard there are people out there that have gone that fast or faster with out heads and a cam.

So what my combo good for at max?
Or am i just dreaming?

 

[Boston GN]

IMO you'll need more injector for 11 O's especially if you think of running 30psi

 

[V8killR4U]

Come on guys let me have it, i need some feed back before i break in to this motor.

 

[Big_D]

You'll probably need injectors for sure.

 

[V8killR4U]

sO WITH INJECTORS YOU THINK ILL SEE LOW 11'S THEN?

 

[Chris McDade]

I went 11.23 with 009's and TE-60. Max boost with that turbo is around 26-27 psi. Car didn't go any faster with more boost.

I say 11.30's to 40's with a good 60ft.

Good Luck

 

[V8killR4U]

Originally posted by Chris McDade
I went 11.23 with 009's and TE-60. Max boost with that turbo is around 26-27 psi. Car didn't go any faster with more boost.

I say 11.30's to 40's with a good 60ft.

Good Luck

YES! THANKS MAN THATS WHAT I WAS LOOKIN FOR! WHERE YOU RUNNING C-16 AND DID YOU HAVE ANY KNOCK? WHAT TYPE OF 60FT TIMES YOU TALKIN BOUT?

SOMEONE ELSE CHIME IN CAN I DO THIS OR DO I JUST NEED TO GET SOME HEAD I MEAN HEADS AND CAM. LOL

 

[c&cgn]

Heads and cam or more turbo. Definately more injector needed if you want to be safe. I went 11.38 on the stock longblock with my 52. Went 11.14 with new motor but I was out of fuel so I couldn't go any further.

 

[Chris McDade]

Strait C-16
60ft's high 1.5's

This was done with port and polished heads. I didn't know your heads weren't done. I say without the heads 11.60's to 11.70's.

 

[Russ Merritt]

Yea it's possible. Stock heads and cam, TA51 KB stage 3 turbo and 40# injectors I went 11.57 with a 1.57 60' Chris, your pretty close!

 

[MSDGN]

See what I'm running in my sig...this is with straight C-16...27 PSI boost...28x9 ET Drags...1.57 60 ft...stock untouched heads...I'd say at 30 PSI boost you'd really be pushing those injectors...I'm pushing my 50's now...