Went to the track for the first time in 25 years. Car ran a 12.5@117.4 mph. Goal was to get into the 11’s which it should have done but my 60’ are terrible at 2.5. For some reason when I try to build boost at the line the RPM will not go any higher than 2600 even with my foot to the floor for a few seconds. Once I hit second gear it the thing takes off.
Mods are as follows 3” DP, alky, 60 lb inj, home P&P heads with bigger valves, old school 208/208 cam, 62-66 turbo, Dave Husek trans, 9” Full Throttle TQ converter, stock rear end, 26” tall tires, SST drivers replacement header (no gasket) and crossover pipe
Things I am going to look at
Exhaust leak on the drivers side from the old felpro gasket, idle FP, recheck turbo waste gate alignment
Looking for any other recommendations.
Mods are as follows 3” DP, alky, 60 lb inj, home P&P heads with bigger valves, old school 208/208 cam, 62-66 turbo, Dave Husek trans, 9” Full Throttle TQ converter, stock rear end, 26” tall tires, SST drivers replacement header (no gasket) and crossover pipe
Things I am going to look at
Exhaust leak on the drivers side from the old felpro gasket, idle FP, recheck turbo waste gate alignment
Looking for any other recommendations.