15x9 pro stars with 3 inch bs question

[h300r]

will a 275 50 15 mt dr fit with no rubbing will i need a spacer etc i am clueless i have these rims and if they can work on the car would love to use them.thx for any help car has all stock suspension

 

[h300r]

Any help

 

[QUIP'6']

weld doesnt make a 9 inch with 3 inch backspace. its probably a 15x8 3.5 backspace. if so they will fit

 

[h300r]

ok thx will i have to do any cutting to the inner lip

 

[Slow91z]

Definitely no spacer needed with that wheel (if it's a 8 with 3.5 bs) but depending on how low your car sits you may have to roll or cut the "lip".

 

[charlief1]

Definitely no spacer needed with that wheel (if it's a 8 with 3.5 bs) but depending on how low your car sits you may have to roll or cut the "lip".

Unless you convert to rear discs it will fit. I converted to rear discs and the Vectors I have won't work now.:frown:

 

[QUIP'6']

i have that size with them and i have plenty of room. i do have air bags though

 

[h300r]

i measured again they are 8 inch so i am glad they will fit thx again for everyones help